GEN 2 Front Bumper Insert

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Hal

Full Access Member
Joined
Nov 7, 2016
Posts
157
Reaction score
118
How is this removed? I need to take this off to install a left side front license plate mount. I'm hoping I don't have to remove the whole bumper.


Sent from my iPhone using Tapatalk Pro
 
OP
OP
H

Hal

Full Access Member
Joined
Nov 7, 2016
Posts
157
Reaction score
118
It just pulls off from the front.



That's good news. I was hoping so. I gave a few firm tugs the other day and it didn't budge. Got nervous there were bolts somewhere on the other end and didn't want to break it.


Sent from my iPhone using Tapatalk Pro
 

SilverBolt

Hired Gun
Joined
Jan 12, 2011
Posts
3,419
Reaction score
2,588
Location
Portland, OR & Eureka, MT
That's good news. I was hoping so. I gave a few firm tugs the other day and it didn't budge. Got nervous there were bolts somewhere on the other end and didn't want to break it.


Sent from my iPhone using Tapatalk Pro

I read a write up on here about the removal. If I remember correctly they started in the middle and worked out. I do remember it saying it took a firm tug.
 

Mkarban

Full Access Member
Joined
Apr 2, 2016
Posts
168
Reaction score
78
Location
Minnesota
I just removed it today. Start in the middle and work out to the ends. They are just metal V clips for retention. They do lose their retention once removed. I'm trying to find replacement clips but no one has them, including Ford. Hopefully someone can provide a lead for new clips.
 
OP
OP
H

Hal

Full Access Member
Joined
Nov 7, 2016
Posts
157
Reaction score
118
I just removed it today. Start in the middle and work out to the ends. They are just metal V clips for retention. They do lose their retention once removed. I'm trying to find replacement clips but no one has them, including Ford. Hopefully someone can provide a lead for new clips.



Let me know if you find them. I don't want to pull it off if I can't get it back on, but I need to mount a front license plate to the left side and I can't do it properly without removing the insert.

Does anyone know if there's anything behind the left side? I know the right has adaptive cruise control. Wonder if it's safe to drill the right while it's attached. Maybe I can pop rivet the bracket on.


Sent from my iPhone using Tapatalk Pro
 

NASSTY

FRF Addict
Joined
Aug 19, 2016
Posts
2,584
Reaction score
3,067
Location
ME
Anyone know the part# for the bumper insert. I drilled holes in mine for my license plate. I want to buy another one, just to have a new one on hand.
 
Top