The pocket lights are our SPP Triple Fog Light Kits w/Baja Designs Lights. We let you pick/choose what lights you want to run. The unlimited kit comes with a pre-designed set of lights. You CAN switch them if you want by buying new lights OR if they are not the racers, you can buy new lenses for them.
Our SPP kit comes with a harness that let's you control the 3 pairs of lights from 3 different switches. The unlimited kit from Baja only gives you 2 switches to be utilized.
Our SPP Kits are here:
http://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights/
Now you CAN swap out the wiring harness you have for our raptor specific all in one harness, that lets you control the 3 lights from 3 different upfitters. It's available here:
http://www.4x4truckleds.com/crystal...rness-w-weather-pack-connectors-baja-designs/
Yes my adaptive cruise control works great. The N-Fab bracket does not get in the way since the ACC is in the lower portion of the truck. I do have a Full Race IC so my ACC is actually relocated now in my grille, but when I had it in the factory spot I had no issues. If you look at your truck, your ACC is on the driver's side, in that black plastic piece next to the lower grille. It's behind that.
The mount requires no drilling. You DO have to make 2 cut-outs in those black plastic pieces on the sides of the lower grille though. As the mount gets bolted behind there.
The mount works with all lights, for the most part. It has multiple slots cut out so you can mount any kind of lights to it. I'd say a 30" Arc would do.. a 40" might be too long.
