Fox 3.0 Question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

everetto

Member
Joined
Sep 14, 2020
Posts
24
Reaction score
30
Location
Central New Mexico
I am interested in trying the 3.0 shocks someday, I may do one end of the truck at a time to spread out the cost. Which end would you guys do first, front or rear? I have to admit that I have not had my 2018 truck long enough to do much hardcore offroading yet, so I am not aware of too many inherent weaknesses, front or rear, at this time. I believe the fronts are set up from Fox to level a stock truck, so that is appealing. Thanks in advance for any input.
 

nikhsub1

FRF Addict
Joined
Mar 5, 2017
Posts
4,319
Reaction score
5,022
Location
Los Angeles
I did the front first... Much harder of an install than the rear so get it out of the way. Also, the rears with the external bypass are noisy AF. You will hear click and clacks over every road imperfection and bump. At first, I thought I had an issue until I learned that it is normal for these.
 

Nick@Apollo-Optics

Supporting Vendor
Supporting Vendor
Joined
Apr 3, 2011
Posts
7,474
Reaction score
3,125
Location
Houston, TX
Top