Forscan changes - tweak your truck

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
17,257
Reaction score
26,289
On a bet, I tried the global open/close, h/t to @debauch and it didn’t work so either I tried and didn’t get it working and reverted or decided against. will be a bit before I can check that, will have to look through saved values.
 

hamster

FRF Supporting Member
Supporting Member
Joined
Mar 14, 2016
Posts
1,099
Reaction score
774
Location
Northern VA
On a bet, I tried the global open/close, h/t to @debauch and it didn’t work so either I tried and didn’t get it working and reverted or decided against. will be a bit before I can check that, will have to look through saved values.
I thought about trying GWO/GWC, but decided to stick with the Ford default of GWO. I use GWO only once in a great while on my 2020 when super hot and remote starting to blow out the super hot air....then decide when to roll up and let air take over. Can't see that I would ever use GWC.
 

NickW

Active Member
Joined
Nov 19, 2021
Posts
66
Reaction score
38
Location
Carbondale, CO
Yesterday was my second attempt at Forscan mods. I was successful with 1) Lincoln mirrors, 2) double honk delete, 3) temp and trans gauges, 4) secure idle and 5) panic alarm mods. I was unsuccessful, even after double checking the following: 6) Global window open\close, 7) auto relock enable. Has anyone else had difficulty with 6 or 7?

I’ve been trying to get global windows to work on my truck without any luck. I’ve enabled the setting in BCM, DDM, and PDM as the spreadsheet suggest, but no luck. I then went through some other modules and found global windows listed (APIM and FCIM I think) and even after enabling there, I still no luck getting global to work.
 
Top