Ford Performance Tune for Gen 3s

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Gary Gere

FRF Supporting Member
Supporting Member
Joined
Aug 13, 2019
Posts
53
Reaction score
103
Location
whitefish Montana
The tool allows you to read and clear Diagnostic Trouble Codes and adjust the tire size and axle ratio stored in the PCM, clear certain adaptive learning, and perform engine off/engine on diagnostics.

You can also display up to 6 "gauges" on the supplied tool, and there are at least 30 of those "gauges" you can select, such as air/fuel ratio, spark timing, rpm, various boost / vacuum / other sensors, waste gate operation, etc. and it comes with a suction-cup device to mount the unit on the windshield.
 

Jesse1983

FRF Supporting Member
Supporting Member
Joined
Sep 16, 2021
Posts
112
Reaction score
159
Location
York, PA
have it yet?


ETA: also has anyone dyno'ed this yet??


Yep - I installed it yesterday. As others confirmed, self-install is a breeze. The install instructions are spot on and the process is very fast.

I haven't put many miles on it, nor have I engaged sport mode yet, so my impression so far is very limited. But, again consistent with what others have reported, I did immediately notice how smooth the truck feels now. It really floats in both up and down shifting. I'm especially excited to see how the downshifts are in sport mode, becuuse prior to the tune the truck would really buck when cycling down.

Will report back again in a week or so with a more definitive opinion.
 
Top