Fog light thought

[chriskent85]

that would be great if you could do that

 

[chriskent85]

got mine installed,

Back of bumper showing what needs to be trimmed


Trimmed


Installed


Fogs from back, one bolt in bottom and one bolt in the top, top bolt has a 3/4 spacer between the bumper and fog.


grill trimmed


Final product.




Lights on, waiting on the HID's, didnt want to go ahead and buy them if the fogs werent gonna fit.

 

[Ruger]

That's very nice work, indeed!

 

[dataustin]

Chriskent85,

Can you provide a link to where you found those lights? Also, do you happen to have the output and current draw per light?

Thanks

 

[verytalonted]

I followed chriskent85's pictures and with a few hours of custom fabbing have my F250 (05-07 style) fogs installed in a similar fashion.











I really like the 'stock' appearance of these Fog Lights and there location. I have never been one for 'aftermarket' looks and trends. So I found a set of F250 fogs in a light smoke (no projector or halo) on eBay, the got the pigtails for a 9005 bulb (fog lights did not have pigtail harnesses since they were made to replace a F250's existing fogs)

The fog lights were around $50 shipped (fleaBay) and the two pigtails were around $10 (vAutoZone).

The hardest part is the dremeling and fitting, go slow to avoid over cutting. but you will have to remove the bumper to do this (four 21mm bolt and 3 smaller bolt that hole the hood release on).

All in all I am pleased with this mod.

Props to chriskent85!!!!

 

[NickPic83]

looks great. i like the smoked ones. when they r off u barely notice them

 

[raccol]

any chance we can get some night shots from inside the cab? low beams with and without the fog lights on would be nice.

thanks

 

[DEADEYE]

Nice job looks good. Night shots would be cool .

 

[verytalonted]

I will try to get some night shots, tonight.

They really cover the area between the truck and where the low beams hit.

I am thinking of replace the bulbs (9145/H10) with some 9005s, as the have more wattage and don't have the paint part on the tip of the bulb.

But am scared of melting... So we will see.

But will get some night shots, hopefully my camera can capture a good image.

 

[NickPic83]

i dont have my truck yet but i am thing about doing this. how hard was it to pull the bumper off? how long of a project would u say this is?