Factory Race series 3.0’s - Non Live valve(2017/2018)

[nikhsub1]

dampening

Pet peeve - its damping. Dampening is to make something wet.
google doc: https://docs.google.com/spreadsheets/d/1lgaz0qPFjIrHZqsOkUweBiZqhjSKQdxBT5f6rbpV8r4/edit?gid=0#gid=0

 

[criminal]

Pet peeve - its damping. Dampening is to make something wet.
google doc: https://docs.google.com/spreadsheets/d/1lgaz0qPFjIrHZqsOkUweBiZqhjSKQdxBT5f6rbpV8r4/edit?gid=0#gid=0

Lol fair call out, I’m going to blame autocorrect - fixed!

 

[2slo4u]

If you used the factory washers for the top hat, check the top fasteners often. They easily work themselves loose if you off-road a lot. Which will then make the holes oval.

Get them revalved with a “ flutter stack” when you go to rebuild them. You will barely notice washboard roads after that

 

[fst96se]

Well a flutter stack certainly sounds interesting!

 

[criminal]

If you used the factory washers for the top hat, check the top fasteners often. They easily work themselves loose if you off-road a lot. Which will then make the holes oval.

Get them revalved with a “ flutter stack” when you go to rebuild them. You will barely notice washboard roads after that

I’m seeing this around quite a bit about the hardware coming loose. I will definitely be keeping any eye on them.

 

[criminal]

Well a flutter stack certainly sounds interesting!

I thought the same but I’ve hopefully got a while until I need to rebuild them. I will have to remember to come back here before I do lol

 

[criminal]

Welp throwing my settings in here I suppose. 6/3 in front 12/10 10/12. Deaver HD +3 in rear. See how this feels for a bit.

 

[nikhsub1]

Welp throwing my settings in here I suppose. 6/3 in front 12/10 10/12. Deaver HD +3 in rear. See how this feels for a bit.

Bruh, put it in the sheet: https://docs.google.com/spreadsheets/d/1lgaz0qPFjIrHZqsOkUweBiZqhjSKQdxBT5f6rbpV8r4/edit?gid=0#gid=0