Eibach Pro-lift springs installed with pics and comments

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

brettmess24

Full Access Member
Joined
Dec 13, 2014
Posts
990
Reaction score
390
Icons installed, set them with optional leaf spring on setting 2, camburg stock shackles and SVC bump kit. Plate is maybe 1/4”.

Truck is sitting at 43.5” in the rear, 300lbs of gear in the bed.

Guessing they will settle half an inch so will probably need two full turns on the Fox to get half an inch rake back.


Sent from my iPhone using Tapatalk
 

NEOGARAGE

Supporting Vendor
Supporting Vendor
Joined
Jan 18, 2019
Posts
577
Reaction score
183
Location
North Royalton, Ohio
Icons installed, set them with optional leaf spring on setting 2, camburg stock shackles and SVC bump kit. Plate is maybe 1/4”.

Truck is sitting at 43.5” in the rear, 300lbs of gear in the bed.

Guessing they will settle half an inch so will probably need two full turns on the Fox to get half an inch rake back.


Sent from my iPhone using Tapatalk
ALREADY? You work quick!
 

brettmess24

Full Access Member
Joined
Dec 13, 2014
Posts
990
Reaction score
390
ALREADY? You work quick!

Busted my ass and got it done in 3 hours, broke my torque wrench and busted an air hose. Good times that I hope to not have to do again shoulders are sore!

Buffalo trace neat for the pain;) glad the wifey made pulled pork!

I don’t know why I do this to myself...headers removed from my C7GS and stock manifolds installed for trade in, now deavers removed for icons!

Sent from my iPhone using Tapatalk
 
Last edited:

Alligator

Member
Joined
Aug 12, 2018
Posts
43
Reaction score
24
Location
NAPLES, FL
Busted my ass and got it done in 3 hours, broke my torque wrench and busted an air hose. Good times that I hope to not have to do again shoulders are sore!

Buffalo trace neat for the pain;) glad the wifey made pulled pork!

I don’t know why I do this to myself...headers removed from my C7GS and stock manifolds installed for trade in, now deavers removed for icons!

Sent from my iPhone using Tapatalk
What are you trading the GS on
 

brettmess24

Full Access Member
Joined
Dec 13, 2014
Posts
990
Reaction score
390
Nice choice! I think I’m going with the GT500 though.

Going to pay big dollars for one of those my man! ADM going to be insane!

I got the ZLE for 18% off or I probably wouldn’t have done it. I was very happy with the Grand sport but I can use the ZLE more.

They ever going to release the damn thing? I don’t think it will beat the ZLE around a race track but we shall see.


Sent from my iPhone using Tapatalk
 

NEOGARAGE

Supporting Vendor
Supporting Vendor
Joined
Jan 18, 2019
Posts
577
Reaction score
183
Location
North Royalton, Ohio
Going to pay big dollars for one of those my man! ADM going to be insane!

I got the ZLE for 18% off or I probably wouldn’t have done it. I was very happy with the Grand sport but I can use the ZLE more.

They ever going to release the damn thing? I don’t think it will beat the ZLE around a race track but we shall see.


Sent from my iPhone using Tapatalk
I hope not. I was able to get the Raptor for invoice since I know the owner of the dealer around here, lol.

I think it should be like end of summer. Not sure. I love the ZL1, I almost bought one but I just hated not be able to see out of it. If the GT500 is able to put the power down efficiently, it shouldn’t be a problem.
 
Top