Eibach Pro Lift Kit and Falken AT3W 37x12.5

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Slow6

Full Access Member
Joined
Nov 13, 2017
Posts
476
Reaction score
198
Location
AK
Nice man. Let us know how it drives, I have a set on order right now but may cancel them for the Geisers. I've seen mixed reports of them being too stiff or "better than stock". Love to know your thoughts.
Make sure you pay attention to the post dates of the comments. When eibach originally released the spring it was rated at 588lbs per inch linear rated that’s why a lot of people thought they were to stiff. Although they haven’t released anything to say what the new rate is (I called last week and mentioned that on the call) new spring rate is 548lbs. Stock Raptor spring rate is 533lbs. I’ll be ordering mine soon also going to replace rear at same time.
 

FrodoTBaggins88

Full Access Member
Joined
Jan 25, 2019
Posts
275
Reaction score
186
Location
US - Utah
Make sure you pay attention to the post dates of the comments. When eibach originally released the spring it was rated at 588lbs per inch linear rated that’s why a lot of people thought they were to stiff. Although they haven’t released anything to say what the new rate is (I called last week and mentioned that on the call) new spring rate is 548lbs. Stock Raptor spring rate is 533lbs. I’ll be ordering mine soon also going to replace rear at same time.

Yeah I was aware they changed the rate pretty quickly. I hear mixed reports. Everyone seems to love the Geisers and I can get some today vs waiting on the Eibachs which I've had ordered for 2+ weeks now and have no ETA.

But if you guys think the Eibachs have as good a ride as the Geisers then no point in spending the extra $350
 
Last edited:

FmaxTurboSi

Full Access Member
Joined
Feb 26, 2018
Posts
485
Reaction score
340
Location
So Cal
I know the geisers are progressive, but I’ve actually read that people think they’re still too stiff.

Does anybody know what rates are for the geisers?




Yeah I was aware they changed the rate pretty quickly. I hear mixed reports. Everyone seems to love the Geisers and I can get some today vs waiting on the Eibachs which I've had ordered for 2+ weeks now and have no ETA.

But if you guys think the Eibachs have as good a ride as the Geisers then no point in spending the extra $350
 
OP
OP
S

SexyAvalancheGrey

Full Access Member
Joined
Dec 29, 2017
Posts
173
Reaction score
73
Just super busy and just got home, will do a full review and better photos eventually. I am adding 1 inch blocks in the rear this upcoming week then a full alignment....
 

Big Blue

Administrator
Staff member
Admin
Supporting Member
Joined
Aug 1, 2011
Posts
4,278
Reaction score
7,633
Location
USA
Looks Great! What's the status on rubbing?
 

FrodoTBaggins88

Full Access Member
Joined
Jan 25, 2019
Posts
275
Reaction score
186
Location
US - Utah
I know the geisers are progressive, but I’ve actually read that people think they’re still too stiff.

Does anybody know what rates are for the geisers?

The 2019 trucks are already considerably stiffer up front than the 17/18. My 2017 was floaty and bouncy, if that makes sense. The 2019 feels like driving a sports car with stiff coilovers. It's good and bad. If you made the 2019 much stiffer up front it would be a stone boat. Trying to avoid that until the Fox race kit is ready for the 2019s.
 

SoxFan

Full Access Member
Joined
Jan 24, 2019
Posts
126
Reaction score
103
Location
Virginia
Just super busy and just got home, will do a full review and better photos eventually. I am adding 1 inch blocks in the rear this upcoming week then a full alignment....

Why the extra 1" in the rear? Would think the Eibachs will settle down a little ?
 
Top