Ditch Light Picture Request

[Deleted member 17706]

Hey, I'm voting with you so pipe down!

Lol I just like giving you a hard time

 

[911 Crazy]

Lol I just like giving you a hard time

I bring it all on myself. Cheers

 

[smgilles]

Thought I'd add to the Ditch light party thread. The brackets are easy enough to install. My biggest complaint is running the lights under the cowl and getting the cowl to snap back and seat correctly again. It was a pain in the A** as far I am concerned.

These XL80's really throw some light....

 

[WRCRaptor]

That is the same set up I had on My Gen1 a pillar and bumper lights and it was awesome!

 

[smgilles]

That is the same set up I had on My Gen1 a pillar and bumper lights and it was awesome!

You are right about the set up. This thing lights up the night like no other.

 

[04Ram2500Hemi]

Thank you for the pics everybody. I’ve got a plan in my head now in regards to exterior illumination. Just need to save some more pennies.

 

[OICNW-Rob]

Anyone run the Baja Designs LP4 on the A-Pillers? What are your thoughts?

 

[4x4TruckLEDs.com]

Anyone run the Baja Designs LP4 on the A-Pillers? What are your thoughts?

We have a customer who had LP6 on his pillars then swapped them out for LP4. He likes them. Here are some photos after a recent trip to our shop (we have these in stock btw along with brackets)

You can see he kept his LP6 and just moved them down low. He has a crazy amount of light. Our triple fog light kit with 3 pairs of Baja, the 30" S8 Bar in the grill, 2x LP4 on the pillars, 4x LP9 on the N-Fab mount, 2x LP6 on the N-Fab mount... and what you THINK is the 10" OnX6 bar in the lower grill is not actually a regular OnX6 bar. That's their 10" FULL LASER bar. The hybrid laser wasn't "laser" enough for him, so 100% laser action it is.

 

[OICNW-Rob]

We have a customer who had LP6 on his pillars then swapped them out for LP4. He likes them. Here are some photos after a recent trip to our shop (we have these in stock btw along with brackets)

You can see he kept his LP6 and just moved them down low. He has a crazy amount of light. Our triple fog light kit with 3 pairs of Baja, the 30" S8 Bar in the grill, 2x LP4 on the pillars, 4x LP9 on the N-Fab mount, 2x LP6 on the N-Fab mount... and what you THINK is the 10" OnX6 bar in the lower grill is not actually a regular OnX6 bar. That's their 10" FULL LASER bar. The hybrid laser wasn't "laser" enough for him, so 100% laser action it is.

View attachment 148944

View attachment 148945

Thanks for your response! Wow that is a crazy amount of light! For sure more than I will ever need! Are there any issues with the antenna in the way? I am running a stubby if that matters.
I am already running the triple bezel light kit with 2 Squadron Pros in spot and driving/combo and S1. Looking to run the LP4 in spot configuration to get more light down range. I also like the IPT feature, as I think it will give me some help with Baja Designs "zone 2" area.

 

[4x4TruckLEDs.com]

Yes the antenna will get in your way if you run the SDHQ mounts (as this customer did). He originally had the Alternative Offroad mounts but he wanted the lights to sit closer to his windshield and lower. So he went with the SDHQ mounts (we stock/sell both mounts). He had to drill his own holes on the bracket to off-set them a little bit. I'd recommend Alternative Offroad mounts for larger lights, SDHQ for smaller (Squadron) lights.

He does have the amber back-lit wired in as well. I just didn't take a photo. Next time he stops by the shop I'll take some more photos of his truck. He has all his LP series lights wired in for amber back lighting. Combined with the Morimotos we sold him, his howl truck looks mean coming at ya.

The IPT doesn't throw a TON of light out sideways but a little bit to help out.