Damage when RPG 1.5” Collars installed. Is this worth escalating with the installer?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Austin Elkins

Member
Joined
Oct 6, 2018
Posts
38
Reaction score
33
Location
Orem, Utah
See attached photos. I had my collars installed earlier today, and finally got around to looking at the installation tonight. I remember when I picked up the truck from the company, they were telling me how big of a pain in the a$$ it was to do and how difficult it was to fit them. Looking at it, it looks like the springs were damaged a bit, whether it’s a structural damaging or more cosmetic is the question. What’re your thoughts? Is this something to be concerned with?

Important to note, I didn’t inspect before the install. I don’t think this came from the factory like this, as the rear springs don’t have any of the same scuffs.
 

Attachments

  • A0B110BD-7D50-45FF-AD01-02CF91D51F3C.jpeg
    A0B110BD-7D50-45FF-AD01-02CF91D51F3C.jpeg
    193.6 KB · Views: 231
  • CD40308E-BC67-40C3-840F-CEF67DDD284B.jpeg
    CD40308E-BC67-40C3-840F-CEF67DDD284B.jpeg
    248.2 KB · Views: 232
  • 36625A4F-3FD4-436C-8816-5ED86E3CE5E1.jpeg
    36625A4F-3FD4-436C-8816-5ED86E3CE5E1.jpeg
    148.5 KB · Views: 233
  • 95C8C0F3-356C-4FA3-93D9-E2CC7DBD9626.jpeg
    95C8C0F3-356C-4FA3-93D9-E2CC7DBD9626.jpeg
    233.9 KB · Views: 229
  • A51D67AB-5819-4647-B816-0BA1848DCC77.jpeg
    A51D67AB-5819-4647-B816-0BA1848DCC77.jpeg
    258.2 KB · Views: 226

austinsiegel

Member
Joined
Oct 13, 2021
Posts
19
Reaction score
11
Location
carlsbad, CA
Just finished doing this same install myself. Ended up with the same marks on the springs from the spring compressors. I rented the compressor tool from auto zone and the groove for the spring to sit in was for a much smaller spring. Since I did it myself I don’t mind, but if I would of paid somebody to do it, I would of expected they had the proper tools for the job.
 

Ox3721

Full Access Member
Joined
Sep 10, 2021
Posts
220
Reaction score
232
Location
Arizona
I wouldn’t be thrilled with the shop that did this, but to answer your question OP, it appears to be just cosmetic.

It would take a different type of force/cutting/grinding to functionally compromise those springs. Have them touch up the chipped paint/powder coat or diy.

The shock bodies are a little different, but they are designed to take hits from brush, small rocks, road debris, etc. Again, purely cosmetic from what I see.
 

2020scab123

Member
Joined
Jul 15, 2020
Posts
29
Reaction score
14
Location
USA
If it’s not broken…don’t fix it. I don’t understand the purpose of the collars and perches. Truck is built right the 1st time around. With that being said…I would ask for a 50% refund.
 

skidmarcx

Full Access Member
Joined
Sep 25, 2021
Posts
103
Reaction score
143
Location
Glendale, AZ
I certainly wouldn’t be happy, but as mentioned it appears to be just cosmetic and the spring could probably be cleaned up with some black paint
 
Top