Custom Bed Rack in SoCal

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bbr3tt

Full Access Member
Joined
Sep 29, 2013
Posts
70
Reaction score
13
Agreed

slowest member of WCPR

what's that suppose to mean?

---------- Post added at 12:49 AM ---------- Previous post was at 12:46 AM ----------

Thanks Jack!

---------- Post added at 09:25 PM ---------- Previous post was at 09:09 PM ----------



No. 5.5' bed (short bed). I THINK it would bolt up the same, but the indexing pin wouldn't reach and lock into the tailgate.

i'd be interested in coming to see it. is it still bolted in your truck? i'd like to see if it would line up. Im not too far from OC, I actually have to make my way down to RPG soon.
 

jackrook

FRF Addict
Joined
Jun 17, 2013
Posts
1,379
Reaction score
705
Location
Bermuda Dunes, Ca
what's that suppose to mean? ---------- Post added at 12:49 AM ---------- Previous post was at 12:46 AM ---------- i'd be interested in coming to see it. is it still bolted in your truck? i'd like to see if it would line up. Im not too far from OC, I actually have to make my way down to RPG soon.

It means you don't have a Raptor.

slowest member of WCPR
 
OP
OP
1ntheoc

1ntheoc

Full Access Member
Joined
Dec 4, 2012
Posts
241
Reaction score
62
Location
Orange County, CA
what's that suppose to mean?

---------- Post added at 12:49 AM ---------- Previous post was at 12:46 AM ----------



i'd be interested in coming to see it. is it still bolted in your truck? i'd like to see if it would line up. Im not too far from OC, I actually have to make my way down to RPG soon.

It's still bolted to the truck; unfortunately, the truck is at a shop in Vegas awaiting custom axles. I'm hoping to have the truck back by the weekend.

If u send me a pic of the inside of your bed, I could tell you if it will fit. Text me a pic (use my cell number on the original post).
 

bbr3tt

Full Access Member
Joined
Sep 29, 2013
Posts
70
Reaction score
13
It's still bolted to the truck; unfortunately, the truck is at a shop in Vegas awaiting custom axles. I'm hoping to have the truck back by the weekend.

If u send me a pic of the inside of your bed, I could tell you if it will fit. Text me a pic (use my cell number on the original post).


ill text you when i get back to town on sunday, i'm in Napa on vaca. If you don't mind me asking how much are you paying for your custom axles? i need custom axles made for my truck. i'm in vegas 2 times a month.
 
OP
OP
1ntheoc

1ntheoc

Full Access Member
Joined
Dec 4, 2012
Posts
241
Reaction score
62
Location
Orange County, CA
ill text you when i get back to town on sunday, i'm in Napa on vaca. If you don't mind me asking how much are you paying for your custom axles? i need custom axles made for my truck. i'm in vegas 2 times a month.

$500.00 without labor, but I believe they are made in CA
 
OP
OP
1ntheoc

1ntheoc

Full Access Member
Joined
Dec 4, 2012
Posts
241
Reaction score
62
Location
Orange County, CA
bump...

Just to give you guys an idea of what it would cost to duplicate this...

I have about $320 in the 1.75, .120 wall, DOM tubing. It was about 110.00 for the hinges and securing pin mount (modified hood pin). 65.00 in tie downs. 80.00 for the C02 mount (the Power Tank Bracket), 110.00 in tabs and gussets and the Lowrance antenna mount, 70.00 in hole saws, cut off wheels and discs. The Pelican case was 240.00 and the Specter water and fuel cans were 210.00 and the power coating was 245.00. This doesn't include gas and consumables for the tig welder (100% tig welded).
 

bbr3tt

Full Access Member
Joined
Sep 29, 2013
Posts
70
Reaction score
13
im still definately interested, cash is a little tight.. was in the hospital this week, so unexpected money had to be spent. :/ if it's still around in 2 weeks ill hit you up and see if we can make something happen.
 
Top