Changing Thermostat

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RR_Raptor

Full Access Member
Joined
May 27, 2020
Posts
84
Reaction score
42
Location
Pittsburgh, PA
theoretically the coolant will start circulating @ a lower temp than stock amounting to overall lower engine temps, I wouldn’t bother w/ it personally on a DD truck, & I also feel like you would be able to accomplish the same thing w/ a tune, or maybe they can only control when rad fans come on....but the other thing I’d mention is I seem to remember members having issues w/ the SPD Tstat not fitting flush to the tank like OEM or not having as secure a fit & leaking or blowing out

should probably research that a bit....or not waste $$$ on one


Thanks!
 

buyrogue_TYH

Member
Joined
Feb 11, 2018
Posts
34
Reaction score
14
Location
Houston, TX
theoretically the coolant will start circulating @ a lower temp than stock amounting to overall lower engine temps, I wouldn’t bother w/ it personally on a DD truck, & I also feel like you would be able to accomplish the same thing w/ a tune, or maybe they can only control when rad fans come on....but the other thing I’d mention is I seem to remember members having issues w/ the SPD Tstat not fitting flush to the tank like OEM or not having as secure a fit & leaking or blowing out

should probably research that a bit....or not waste $$$ on one

The issue with the SPD thermostat was related to the supplied gasket not creating that OEM seal. When I replaced mine, I just ordered a spare gasket from the local Ford Parts store (Thermostat gasket: HL3Z-8255-A) and used that based on the recommendation that you shouldn't reuse the original. To be honest, the original didn't look like it had that much wear and I was at 26K miles.
 

Syberspace

Full Access Member
Joined
Jan 1, 2021
Posts
657
Reaction score
1,047
Location
Pittsburgh
theoretically the coolant will start circulating @ a lower temp than stock amounting to overall lower engine temps, I wouldn’t bother w/ it personally on a DD truck, & I also feel like you would be able to accomplish the same thing w/ a tune, or maybe they can only control when rad fans come on....but the other thing I’d mention is I seem to remember members having issues w/ the SPD Tstat not fitting flush to the tank like OEM or not having as secure a fit & leaking or blowing out

should probably research that a bit....or not waste $$$ on one
The thermostat controls the temperature of the engine. You could add a very large fan and radiator... the temperature will not change if you don't change the tstat (under normal operating conditions... not towing a 8000# trailer up a mountain... then yes, the larger rad and fan will help). If you try to cool more with a fan, the thermostat will close and bring the temperature up (again, normal operating) If you want a lower engine temp, change the tstat to a lower value. Not commenting on benefit.
 

Therock88

Full Access Member
Joined
Sep 11, 2021
Posts
183
Reaction score
294
Location
Office Chair
Just adding to an older discussion here in case others may be researching as well. Confirmed on my Gen 2 that the Thermostat is definitely 61 MM and 195 degrees. Added a photo for reference.

I just replaced mine yesterday with a 180 degree thermostat as it is now tuned and has Water/Methanol and other mods. Seems to be running cooler also! I did not go to the 170 degree as I live further north.

DC

1s.jpg
 

Zeusmotorworks

Semi-retired, now just a happy grumpy old man!
Supporting Member
Joined
Jan 17, 2017
Posts
2,397
Reaction score
4,249
Location
Northwest shore of Lake Travis
Just adding to an older discussion here in case others may be researching as well. Confirmed on my Gen 2 that the Thermostat is definitely 61 MM and 195 degrees. Added a photo for reference.

I just replaced mine yesterday with a 180 degree thermostat as it is now tuned and has Water/Methanol and other mods. Seems to be running cooler also! I did not go to the 170 degree as I live further north.

DC

View attachment 333986
Who did you source the 180 from?
 

Therock88

Full Access Member
Joined
Sep 11, 2021
Posts
183
Reaction score
294
Location
Office Chair
Who did you source the 180 from?
Hi...

I found mine at a local parts store. Motorad is an OE type supplier and the part # was/is 655-180. Nothing special and pretty inexpensive (like any other Themrostat). It fit perfectly and works as designed.

Good luck.
DC
 

raiderofthelostark

Full Access Member
Joined
Dec 13, 2021
Posts
108
Reaction score
263
Location
Seattle, WA
I'll be adding a Mishimoto Radiator and 180 thermostat soon. Will report back results but think the radiator alone will be the biggest improvement.

We do these thermostats on a lot of racecars, especially with fan deletes. Don't see why it wouldn't help here
 

nikhsub1

FRF Addict
Joined
Mar 5, 2017
Posts
4,330
Reaction score
5,043
Location
Los Angeles
I'll be adding a Mishimoto Radiator and 180 thermostat soon. Will report back results but think the radiator alone will be the biggest improvement.

We do these thermostats on a lot of racecars, especially with fan deletes. Don't see why it wouldn't help here
The truck doesn't need a radiator, it obviously doesn't hurt but not necessary. The thermostat is what makes the biggest difference.
 
Top