Bumper Swap Parking Sensors

[txraptor3]

Swapping a ‘24 Raptor R bumper onto my ‘24 37, just trying to get rid of the silver section. I’ve searched, can’t find an answer - apologize if I missed it.

Anyone have the black sensor part numbers for the front bumper on the R?

 

[MZRaptor72]

I was told to get the following… I’ve bought but not yet used. They were bought on eBay. Whoever put that number out on the forum has said they worked plug and play on 24’s.

 

[Great Scott]

Is it not just the housing you need to replace? Apparently there's a part number for the housing of it. I don't know if there's a specific housing part number for the front or rear but I found this below.

ML3Z15K861AB

 

[NACHOMASTER]

Swapping a ‘24 Raptor R bumper onto my ‘24 37, just trying to get rid of the silver section. I’ve searched, can’t find an answer - apologize if I missed it.

Anyone have the black sensor part numbers for the front bumper on the R?

I’m curious, did you buy the R bumper from Ford?

 

[txraptor3]

I’m curious, did you buy the R bumper from Ford?

No sir, I bought it off Marketplace.

 

[Daneger]

Did any verify the black parking sensors part #. The silver is killing me.

 

[ToadSmasher2K1]

Did any verify the black parking sensors part #. The silver is killing me.

I believe all the sensors and trim rings come unpainted. Paint-to-match

 

[txraptor3]

Did any verify the black parking sensors part #. The silver is killing me.

I figured out they come paint to match, I just sanded mine down with 3K grit sandpaper and then spray painted to match.

I did find the outer retainer is part no. ML3Z15K861AB

The sensor itself comes unpainted and then you have to paint anyway, so it’s easier to just light scuff and then paint.

 

[txraptor3]