GEN 2 Builtrite Mount, 67 Design and RAM mounts

[BangBang]

It would be difficult (not impossible) to install the 67 ball mounts afterward.
Just not enough room to work with after Builtrite mount install.

But you can get RAM Mount track balls that you can be put in without taking stuff apart.

Would it be possible to have the bracket flipped around to the back?? That looks like it would still allow you to drop stuff in the cubby (if needed). Not to mention the arms look like they can be adjusted in length so that could help.

You mount it. So do what you like!
It takes about 40 min of slow unlabored work. Ya know, reading instructions or watching the video, do a little work, double check. Once you know it how it takes 10-15 min to pop everything off and mount a new ball. I have to pull up the video on BuiltRight for the tool selection.

 

[HeavyAssault]

I wasn't sure if it was personal preference or required to face one direction.

 

[BangBang]

I wasn't sure if it was personal preference or required to face one direction.

The stretch to reach for things the mount reversed will probably be 4-6 inches longer. Or, buy longer mount arms. 67 Design has really good lengths.

 

[MDJAK]

Can I trouble the OP to post a link, please, to the balls you got on amazon. I looked but can’t find those and I think they look great. Ty in advance. I have the built right mount coming my way.

 

[nfsraptor]

Goal:

1. Mount an iPhone XMax, ****** 360c Radar Detector, and wife's Iphone X
2. Utilize some carbon trim to compliment my interior
3. Adjustability for future changes/additions
4. Sturdy/Heavy Duty

Here is what I used and how much I actually spent (delivered):

Total time: 2 hours (1 hr set up, 1 hour install)
Total cost: $370

• Builtrite mount ($45)
• RAM Magnetic mount and ball via Amazon ($20)
• ProClip Iphone MAX w/ power ($75)
• Misc. small bolts and fasteners via local hardware store ($2)
• 67 Design ($228)

67D-CF-BL20-BACKING-PLATE Simple Ball Mount - With Backing Plate x3
67D-CF-F70X Carbon Fiber Arms - Fixed - Small x1
67D-CF-UNI-ALU-MED Universal Aluminum Squeeze Device Holder for Android, iOS and other Devices - Medium x1
67D-CF-FMINI Carbon Fiber Arms - Fixed - Mini x1
67D-CF-DAM-ADAPTER-SINGLE The Dam Adapter™ - x1
67D-CF-F70X Carbon Fiber Arms - Fixed - Small x1
67D-CF-AMPS-PLATE AMPS-Plate x1​

View attachment 116081 View attachment 116082View attachment 116083

Amazing write up thank you I just ordered this to mount an iPad for the lead nav gps but now I may get a phone mount and radar detector/mount seeing your setup!

 

[BlazinPond]

Thanks guys.

Let me find my Amazon order and add a link. Stand by...

 

[BlazinPond]

https://www.amazon.com/gp/product/B004O8LF26/?tag=fordraptorforum-20

See if this works...


Sent from my iPhone using Tapatalk

 

[BlazinPond]

Can I trouble the OP to post a link, please, to the balls you got on amazon. I looked but can’t find those and I think they look great. Ty in advance. I have the built right mount coming my way.

The 3-main balls were from 67 Design. The Amazon ordered ball was only for the radar detector mount if I recall correctly.


Sent from my iPhone using Tapatalk

 

[MDJAK]

Thank you for replying. It is those three silver balls I want but don't see them on builtrite's site. Maybe they don't have them any longer. Much appreciated.

 

[BlazinPond]

Thank you for replying. It is those three silver balls I want but don't see them on builtrite's site. Maybe they don't have them any longer. Much appreciated.

Builtright only makes the mount itself. Not the balls. That is 67 Design.