BF Goodrich 37 lie

[dj30417]

LOL.... Post 6 is on page 1 there are 10 post per page. click the link and it will tell you the true size of the 37 witch is 36.5. I am sure it is calculated by the circumference and PIE. ya know Math. LOL...... not some guy with a tape measure in his garage...... going well that looks like 35 inches chuck what do you think? they said them there tires were 37 and they ain't. LOL If you would like to do the math. I can post it.

Please post the equation. I need to undumb just a little.

 

[Gumby]

LOL do the math and then get back to me. circumference = 2 PIE R ( pie is 3.141592654)
c=2 (pie)R

 

[Gumby]

So my 35 KO measures109 inches witch is 17.3511621 X2 = 34.7023214 now the link on page 6 said it should be 34.4 now mine is aired up that might be why it is a little larger. Not smaller. see math wins. not bill and chuck in the garage with a tape.
Bill and Chuck way might be 33.5 possible 34ish????? what do you think Dave????

I used Weedeater line what I had handy 109 inches

tire size LT 315/70 R 17 chart on page 1 post 6 says 34.4

Math says 34.7023214 =34 3/4ish

Hope this helps..... and the chart on page 1 post 6 is proven to be accurate. Thank You @RogueClimber

 

[Tyler James Inc]

37s on a 4runner, what year model 4runner? My 2016 4runner with a lift still rubbed a little with 33's lol. Only chance of getting 37s on a runner is if its an old one with the fenders removed or a newer one with a massive drop bracket situation. I want to see a picture of this thing lol

Haha no, no drop brackets here.
2001 2.5”F/3.5”R and 1” body to tuck the F-Series tank flat with the rear frame rails and bumper.

5 speed swapped, blah blah blah. Need to sell it to make room in the garage for the Ford.

 

[shigman]

View attachment 458303
Haha no, no drop brackets here.
2001 2.5”F/3.5”R and 1” body to tuck the F-Series tank flat with the rear frame rails and bumper.

5 speed swapped, blah blah blah. Need to sell it to make room in the garage for the Ford.

Sweet…They really limited the newer ones, 37s are basically impossible unless you get out of control. Then you need gears…lol

 

[GordoJay]

LOL do the math and then get back to me. circumference = 2 PIE R ( pie is 3.141592654)
c=2 (pie)R

I think that's spelled pi. Or you could just type π.

 

[Gumby]

I think that's spelled pi. Or you could just type π.

It is...... you are correct. but I figured I was dealing with bill, chuck and Dave. pi might be confusing and I couldn't figure out how to get the symbol. LOL..... food pie seemed to be better for this Application. Besides who doesn't like pie. I mean look at the title if the thread. They think their 37 tires are 35. and Bf Goodrich is pulling some big lie on them, and it posted clearly what the diameter is.

 

[GCATX]

It is...... you are correct. but I figured I was dealing with bill, chuck and Dave. pi might be confusing and I couldn't figure out how to get the symbol. LOL..... food pie seemed to be better for this Application. Besides who doesn't like pie. I mean look at the title if the thread. They think their 37 tires are 35. and Bf Goodrich is pulling some big lie on them, and it posted clearly what the diameter is.

How can you measure a round tire when pies are square?

 

[GordoJay]

How can you measure a round tire when pies are square?

What? Cakes are square. Pies are round. Boys, I think we've found a Russian infiltrator.

Either way, that comment deserves pun-ishment ...

 

[GCATX]

What? Cakes are square. Pies are round. Boys, I think we've found a Russian infiltrator.

Either way, that comment deserves pun-ishment ...

The beatings will continue until moral improves aROUND here.