JayneCobb
Full Access Member
Does it come in Black.....
bed stabilizer how-to
- Thread starter pat'sRAPTOR
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
- Joined
- Jul 2, 2013
- Posts
- 879
- Reaction score
- 1,115
It's stainless steel. I painted it black.
strafe
Full Access Member
And here are the pictures. I have been very busy lately so sorry it took so long.
OP
OP
pat'sRAPTOR
FRF Addict
Txfight00
Full Access Member
Pat did you cut out the bed bolt area more? Spoke with TMX on the phone regarding the bending issue and they said with lined beds, they recommend cutting out a little around the bed bolt to make the bracket sit flush. Looking good!
OP
OP
pat'sRAPTOR
FRF Addict
That's Exactly what I did! I mentioned that to Jason when the bending issue first came up cause when I got the test set I laid the lower bracket down traced it with chalk and cut the bed liner out is it sits flush with the bed metal on metal.
Txfight00
Full Access Member
Perfect. When I can find a sec I'm going to get mine installed. What did you use on the liner? Dremel?
OP
OP
pat'sRAPTOR
FRF Addict
I have the drill but size listed in the first post in here I made a list of everything you'll need it's really simple I had my wife do the left side while I did the right so if she can do it anyone on here can lol
- Joined
- Jan 12, 2013
- Posts
- 204
- Reaction score
- 253
Yea that should fix the issue. Strafe's pictures are abnormal from what we have seen in testing. We will work to get those replace and get them back to the shop and analyze them.
strafe
Full Access Member
Thank you for the quick response and I will get them back to you as quick as possible. I have been told many times how abnormal I am so it is not surprising. Otherwise still a great product and great support!
