GEN 1 Bed Lights install HELP

[HEAVYDUTY]

I recently purchased some battery operated bed lights for my Raptor. The lights stick well but I can't find an adhesive for the battery box to stay on the bed liner. I have tried using all types of tape for the battery box and it still doesn't stick. Any ideas? I do want to try glue but don't want to have to deal with taking it off in the future. I will upload some pictures later.

 

[The Car Stereo Company]

3m has a red double sided tape that works well. also kent has a yellow/green tape that is another option

 

[Tommysyko]

I used the 3M red tape for mine. I had the same issue. The lights held but I needed something stronger for the battery box (3M)


Sent from my iPhone using Tapatalk

 

[Ironhorse07]

The red 3m trim tape would not hold? How big is this battery pack?

 

[HEAVYDUTY]

Is there a link/specific brand or just any 3M tape

 

[The Car Stereo Company]

3M Scotch 1 in. x 11.1 yds. Extreme Mounting Tape 414-LONG/DC at The Home Depot - Mobile

 

[Ironhorse07]

I was thinking the 3m body molding tape https://www.amazon.com/dp/B000BO913C/?tag=fordraptorforum-20 you can find it a NAPA too.

 

[The Car Stereo Company]

I was thinking the 3m body molding tape https://www.amazon.com/dp/B000BO913C/?tag=fordraptorforum-20 you can find it a NAPA too.

same stuff. i just posted the 1" wide tape

 

[thurley42]

I used tape and clear silicone over the top..but I ran mine to Aux Switch 4..not sure if that will work for a battery set up.

 

[HEAVYDUTY]

The 3M tape works great!! But now the adhesive on the light strip is falling off. Any suggestions? I'm thinking of getting an adhesive spray to make the back side of the Led strip more secure. Any brands you guys would recommend?