Balance beads

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dustan

FRF Supporting Member
Supporting Member
Joined
Dec 10, 2018
Posts
486
Reaction score
640
Location
Boulder Colorado
I thought they were snake oil but a tire shop recommended them and said if they didn’t work they would balance for free. I can feel a little wobble at really low speed but they’re smooth at highway speeds. I would put them in again
 
OP
OP
mattyz99

mattyz99

Full Access Member
Joined
Dec 10, 2016
Posts
116
Reaction score
48
Just an update, installed the beads and my ride is smooth again, can’t say they’ll work for everyone, but so far I’ve put 40 miles on them and they work for me
 

Pacific Wheel

Supporting Vendor
Supporting Vendor
Joined
May 19, 2016
Posts
2,972
Reaction score
2,435
Location
Reno, NV
I use Dynabeads..they sell them at Grainger....4oz per tire....37s KO2

The weight to use is the only inconsistency I've seen. It seems like the recommendations all are all over the place. Some say as many as 8oz for a 35" tire and you have better results with a 4oz in a 37" which is good info to have on here.

We did have a customer follow a guideline that came with the beads he bought online and the truck shook like crazy. Sadly they were beadlocks and a pain to change but after taking out 3/4 of the recommended amount all was good. Never a problem since.

I recommend them but sometimes they make take some fine tuning. Not always a one size fits all.
 
Top