BakFlip F1 with new dual action seal.

[Tonecapone]

Since the truck came with the boxlinks I do not really need the bolted on anchor points in the front of the truck anymore so I opted to use them to secure the drain hoses. I think that it looks a little cleaner. I also cut the drain hoses off as short as possible and at an angle so that the hose ridges help to hold them in place and the angle allows space to not rub against the cab.


Tone

 

[sea2jet]

With 7/8" holes They were big enough so I could wrap 5-6 turns of electrical tape on the end of the hose. Twist them through and then the electrical tape keeps the hose from pulling out of the hole

 

[BigGriff023]

Would it be possible to purchase the new seal system for the older model F1?

 

[Ashton]

I had an F1 for 2yrs and it was awesome. The only thing I didn't like is that it faded white due to the sun being so hot in Georgia. I plan on buying one for my new truck.


Sent from my iPhone using Tapatalk

Fading is covered for 3 years on the F1 cover. Contact service and they should replace it.

---------- Post added at 06:08 PM ---------- Previous post was at 06:07 PM ----------

Would it be possible to purchase the new seal system for the older model F1?

I don't think so, the back frame is little different for my 15 F1. If it's less than 60 days from purchase they said it can be returned for any reason.

 

[Ruri]

Since the truck came with the boxlinks I do not really need the bolted on anchor points in the front of the truck anymore so I opted to use them to secure the drain hoses. I think that it looks a little cleaner. I also cut the drain hoses off as short as possible and at an angle so that the hose ridges help to hold them in place and the angle allows space to not rub against the cab.
View attachment 85796
View attachment 85797
Tone

Does the spray in bed liner adhere the bed plugs to the bed? Or can they be easily removed and replaced?

 

[5mith5]

I just had my bed LineX'd. The Bed Plugs were sprayed, but I was able to easily wiggle them out with a flathead and put them back with no problem.

 

[Cliff Lohner]

I kept the G2 from my F150 and put it on my new Raptor. I was happy to find my Rapto had a hole on easy side I could run my drain tubes into instead of having to run it out of the lower plastic plugs. I’ll attach a pic in a little....