Baja Designs XL Linkable Kit Installed

[4x4TruckLEDs.com]

Another happy Raptor owner leaving our shop today. This customer came in for one of our Baja Designs Triple Fog Light Kits w/KR Off-Road brackets. He opted for 3 pairs of Squadron Sport (Wide Cornering, Driving/Combo, Wide Cornering Amber).

His factory fog switch controls the Wide Cornering while the other 2 pairs are controlled from Aux 1 and 2.

Then we also installed a Baja Designs S2 Reverse Kit which turns on automatically (as well as from Aux 6).

Finally we threw on an XL Linkable Kit. We changed some of the lenses for him and used our custom harness so that Aux 3 controlled the 4 white lights and Aux 4 controlled the outside amber Driving/Combo lights. Normally this kit daisy chains the lights together and is controlled from 1 upfitter. But this customer wanted to control 4 from 1 switch and 2 from another. So we just used one of our CrystaLux harnesses.

Pretty easy kit to install, but takes a bit of time to align all the lights since it's a linkable kit. But we got it done for him.

We're also installing an a-pillar kit soon with Baja Designs Squadron lights.

If you're interested in one of our kits, check them out here

Fog Kits: https://www.4x4truckleds.com/vehicle-specific/ford/ford-f-150/2021-f-150-raptor/fog-lights/

Grill/Bumper/Pillar Kits: https://www.4x4truckleds.com/vehicl...0/2021-f-150-raptor/other-lights-accessories/

 

[sf2360]

Adam and the crew are best in business. From selection to Installation, no one is better than them in LI.

 

[4x4TruckLEDs.com]

Adam and the crew are best in business. From selection to Installation, no one is better than them in LI.

Thanks for coming in. We'll see you on the next one!

(Bring the Raptor when you come back next time, I wanna just re-tighten the bolts on the XL after you've driven the truck a bit)

 

[figure1a]

What about front camera relocate? Surely, they would need that done to make the front camera useful again.

 

[4x4TruckLEDs.com]

What about front camera relocate? Surely, they would need that done to make the front camera useful again.

Nope. You just see part of the light bar in the front camera is all.

 

[figure1a]

With my BD XL Linkable kit, the pods were pretty big in the camera view and pretty much destroyed the 360 view (llooked like I had Mickey Mouse ears on the front of my truck). Camera relocate kit fixed it:

Ford F-150 Raptor 2021+ Gen3 Front Camera Relocate Kit

Our front camera relocate kit for the Gen3 Raptor 360 front camera is tailored for the Baja Designs Ford XL Linkable Bumper Light Kit. The kit can also be used with other configurations as we made four mounting holes on the bottom to aid in creating custom installations. This kit moves the...

nine-volt.com

 

[figure1a]

Here's what that BD linkable kit looks like in the Raptor camera without doing a camera relocate: