Baja Designs Fog Pocket Kit

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

gneissday

Full Access Member
Joined
Jun 30, 2016
Posts
226
Reaction score
164
I've got the BD S8 30" and Onx6 10" light bars behind the upper and lower grills. I agree with you that the light emitted from BD lights is top notch. The S8 was quite a process to install and adjust, but now that everything is situated, it performs great.
 

TMW!

Full Access Member
Joined
Apr 5, 2017
Posts
122
Reaction score
47
Are your two inner lights cut off in the bumper or is it just the angle of the picture?


Sent from my iPhone using Tapatalk



Want to know this as well. I'm also considering putting ambers for the cornering/wide patterns


Sent from my iPhone using Tapatalk
 
OP
OP
RaptorCoastie

RaptorCoastie

NorCal Raptor Runs
Joined
Jan 18, 2016
Posts
209
Reaction score
328
Location
Northern California
Are your two inner lights cut off in the bumper or is it just the angle of the picture?


Sent from my iPhone using Tapatalk

It's just the close angle of the photo. None of the LEDs are cut off by the pocket area/bumper.

To the OP, can you post pictures of the backside of the bumper? I would like to see how much the lights extend towards the tires.

I'll get a photo a little later, but the lights don't extend much towards the tire at all. Not even close to the point where I'd worry they would ever make contact under any circumstance. They pretty much stop at the natural progression of the downward slope of the fender flare if it were to continue downward

I would also please like to see a pic from the back side.

See above.

---------- Post added at 06:10 AM ---------- Previous post was at 06:09 AM ----------

Want to know this as well. I'm also considering putting ambers for the cornering/wide patterns


Sent from my iPhone using Tapatalk

See previous reply. I also think ambers would be best suited for a stronger beam pattern than wide cornering yes? That pattern is really helpful in a solid white configuration and helps spread out the light left and right. Amber would be nice to punch out through things like fog. Maybe the Racer edition would be best.

---------- Post added at 06:26 AM ---------- Previous post was at 06:10 AM ----------

Nice fogs and intercooler, btw which one is it?


Sent from my iPhone using Tapatalk

I have the ADD/Full Race intercooler. To my knowledge that is the only one on the market currently.
 
Last edited:

Jtnuge

Full Access Member
Joined
Feb 14, 2017
Posts
487
Reaction score
133
Which lights did you put in the middle spot? Driving or spot. I'm getting closer to getting this setup. Just deciding on sportsman or pro.
 

hkguns

FRF Addict
Joined
Jul 30, 2016
Posts
1,173
Reaction score
894
I put my spots on the inside and the driving combo in the middle.

Get the pro package.
 

Robtor310

FRF Addict
Joined
Jul 19, 2016
Posts
1,486
Reaction score
869
Location
Redondo Beach CA
Which lights did you put in the middle spot? Driving or spot. I'm getting closer to getting this setup. Just deciding on sportsman or pro.

I put my spots on the inside and the driving combo in the middle.

Get the pro package.


Cool so spots on the inside is the way to go then...I just ordered mine and I was wondering the same thing.
 

naptown

Full Access Member
Joined
Jan 7, 2011
Posts
244
Reaction score
98
Location
Annapolis, MD
Looks good. Can you post some more close ups of the lights and brackets. I had my '11 raptor rigged with Rigid and now the mods start on the new rig. Been looking for the best setup but am shocked to here these lights perform like rigid. Thanks


Sent from my iPad using Tapatalk
 
Top