Baja Designs bolts that secure bracket into side of ONX6 light bar?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BunBoHue

Member
Joined
Dec 30, 2020
Posts
1
Reaction score
0
Location
East Side Atherton, Killa Kalifornia
Hi Raptor Heads,

Would anyone happen to know the exact bolts used to secure the side of the Onx6 bracket into the side of the light bar? I've attached a photo of the two bolts needed, one which is longer and has an unthreaded shoulder.

I purchased an onx6+ 10" light bar and was given hardware for an S8. BD is sending me the correct brackets but on the invoice, I don't see anything about bolts so I'm anticipating not receiving. Instead of bugging them again, I'd rather just run to the hardware store and get what I need in S.S. Please let me know if you would happen to know the lengths, thread pitch and if they are metric or SAE.

Thank you

50782058782_249215ca80_c.jpg
 

JohnyPython

FRF Addict
Joined
Oct 28, 2018
Posts
10,482
Reaction score
47,523
Location
Canada
I didn’t measure the threads but I think they’re metric.

I used metric sized wrenches to install mine.
 

rayofsi

FRF Supporting Member
Supporting Member
Joined
May 6, 2019
Posts
400
Reaction score
170
Location
NYC
1/4-20 for mounting hardware. everything else is metric
same screws for the s8 and onx6
 
Top