Baja Designs Behind Grill Kit with Laser Hybrid

[khildebr]

Does it extend into the area where the shutters are at all, or have any involvement with the shutters?
That would be where the fitment issues could arise.

If you're unsure, feel free to text me and I can get you with John to discuss further. I would just want to make sure on fitment before I told you to buy something.

Thanks!
Sidney @ SPV Parts
(317) 934-6778

I figured it out. The Raptor/F-150 has two sets of active shutters. A lower set where the factory intercooler sits and and upper set of active shutters that sit above the bumper. So the intercooler upgrade that I have only occupies the area where the lower active shutters are and not the upper set of active shutters that sit above the bumper where the OnX6 would be mounted. In looking at the BD installation and your installation instructions, it shouldn’t be an issue. If I had gone with a full race intercooler upgrade that would likely be a different story as that covers both active shutter areas. Appreciate your responses and apologize for not being clearer about the type of intercooler upgrade I am running.

 

[PaveLow]

I just yanked all 5hem shutters out. Weeks before the full Cobb inatall. Had no problems with the grill being wide open

 

[PaveLow]

I just yanked all 5hem shutters out. Weeks before the full Cobb inatall. Had no problems with the grill being wide open

 

[Sparda1123]

If it's a factory location intercooler, you're good. If it's a high mount then no. I have the CVFAB which is a little larger than a Cobb factory location.

The list of all my Performance parts is in this thread: https://www.fordraptorforum.com/threads/the-highest-power-2023-ecoboost-raptor-in-the-world.104621/