Aftermarket shocks nitrogen pressures

[Squatting Dog]

The higher pressure helps prevent the oil from foaming..


-Greg (aka squatting dog)

 

[justvettn]

i put my shocks at 150-180 psi. some run it up to 250

Which ones? the rears.

 

[Netix]

Fronnts

 

[RPG]

typically 200psi is about where you want to be. If you need to adjust for ride quality, start with valving and spring rates and leave the pressure as is from the factory.

 

[ICONRep]

ICON 3.0 Raptor Shocks are set to the following from the factory


Front 3.0 Coilover - 180PSI

Rear 3.0 Bypass - 250PSI (220+ is acceptable)

 

[Squatting Dog]

Per ICON:

Fronts: 220psi
Rears: 160psi

Bumps 50psi


-Greg (aka squatting dog)

 

[keatonskidmore]

ICON 3.0 Raptor Shocks are set to the following from the factory


Front 3.0 Coilover - 180PSI

Rear 3.0 Bypass - 250PSI (220+ is acceptable)

Per ICON:

Fronts: 220psi
Rears: 160psi

Bumps 50psi


-Greg (aka squatting dog)

Little confused here Greg..lol

 

[Madcowranch]

ICON 3.0 Raptor Shocks are set to the following from the factory


Front 3.0 Coilover - 180PSI

Rear 3.0 Bypass - 250PSI (220+ is acceptable)

Per ICON:

Fronts: 220psi
Rears: 160psi

Bumps 50psi


-Greg (aka squatting dog)

 

[Squatting Dog]

Little confused here Greg..lol

Me too...

Here is the last email...

"Scrap that I looked at the wrong thing


Front: 180 PSI
Rear: 250 PSI"


-Greg (aka squatting dog)

 

[Madcowranch]

Me too...






Here is the last email...

"Scrap that I looked at the wrong thing


Front: 180 PSI
Rear: 250 PSI"


-Greg (aka squatting dog)