ADD Pro vs. SVC Baja Bolt On Comparison

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TheTeej

Full Access Member
Joined
Jul 19, 2015
Posts
448
Reaction score
389
Location
Denver, Colorado
Any of you guys with these notice any difference in MPG from stock? When I did the Baja bumper on my g1 I lost a couple MPGs
 

gordo

FRF Supporting Member
Supporting Member
Joined
Oct 7, 2019
Posts
164
Reaction score
68
Location
Ft Liquordale
Day 3 of quarantine, er I mean bumper install. After trimming the lower louvers for what seemed like an eternity I realized the lights need to go on there too. FML. So now I’m taking apart the grille to get to the bolts for the lower louver so I can remove it. And btw SVC sent the wrong ACC relocater bracket so I’m going to have to do this grill removal twice. Can’t just leave my truck since I already took off the steering bolts. FML x 1000000000
 

Simplejack

Full Access Member
Joined
Jul 18, 2018
Posts
812
Reaction score
730
Location
dallas tx
Lol I feel your pain. my 1st bracket was incorrect. Had to put it all back together. Week later got correct bracket and installed it. 3 weeks later removed it all again due to ACC not sensing correctly, had to adjust bracket = bend it. Month later the hose that washes front camera sprung a leak so windshield wiper fluid just drained out. Had to take front off again. If you get more than 4 U win!;)
 

Raptor911

FRF Addict
Joined
Aug 9, 2012
Posts
4,690
Reaction score
2,252
Location
Ashburn, VA
Question ... How did you know SVC sent the wrong ACC bracket?

Also, when you say "steering bolts", do you mean the 2 massive steering rack bolts? I assume you have to remove them to attach the lower part of the SVC bumper?

Day 3 of quarantine, er I mean bumper install. After trimming the lower louvers for what seemed like an eternity I realized the lights need to go on there too. FML. So now I’m taking apart the grille to get to the bolts for the lower louver so I can remove it. And btw SVC sent the wrong ACC relocater bracket so I’m going to have to do this grill removal twice. Can’t just leave my truck since I already took off the steering bolts. FML x 1000000000
 

gordo

FRF Supporting Member
Supporting Member
Joined
Oct 7, 2019
Posts
164
Reaction score
68
Location
Ft Liquordale
Question ... How did you know SVC sent the wrong ACC bracket?

Also, when you say "steering bolts", do you mean the 2 massive steering rack bolts? I assume you have to remove them to attach the lower part of the SVC bumper?

because the holes don’t align with my ACC module. I already spoke to Dominic@SVC and he sent the additional part needed. I’m going to take pics today or tomorrow after I hook up the lights and give a full detailed review.

And yes I am referring to the 2 bolts where the lower portion of the bumper attaches.
 

Raptor911

FRF Addict
Joined
Aug 9, 2012
Posts
4,690
Reaction score
2,252
Location
Ashburn, VA
Please take pics of the 2 bolts where the lower portion of the bumper attaches.

Thank you!

because the holes don’t align with my ACC module. I already spoke to Dominic@SVC and he sent the additional part needed. I’m going to take pics today or tomorrow after I hook up the lights and give a full detailed review.

And yes I am referring to the 2 bolts where the lower portion of the bumper attaches.
 
Top