It looks like that video shows how to recalibrate on Forscan. It's pretty easy. I did have to do it two or three times before it stuck, had no problems after that.
ADD Phantom Front Bumper Question
- Thread starter wreckitshaw
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I am going to pull the grill off and make sure its set correctly and see what I get if no go I will recalibrate with Forescan. Thank you for this info I am pretty sure I can work it out with this Tech Info.
I did my calibrations on the highway. I believe you have to be going 30mph or above. The highway also gives the sensor more readings off other cars, if that is in fact what it’s looking for. Who knows
Good luck
Good luck
You also want it to be slightly angled down, especially when in the upper position.
k9ltd3
Member
I'm about to install mine as well on my 24 with the honey badger bumper with upper loop. So I need to mount in the top position. I have seen several posts saying to angle it down a little. Has anyone measured the exact angle of that? Just want to get it right the first time so I'm not having to keep taking things apart to adjust.
Similar threads
