5.0 swap vs building the 6.2

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
C

Cody Templeton

FRF Addict
Joined
Oct 29, 2020
Posts
1,455
Reaction score
1,130
Location
Des Moines, IA
I would have thought the 5.0 would have been "easier." Looks like the 7.3 is way to go but still not easy and or have it work without issues

If you get the swap kit it sounds like there's nothing "extra" needed. It uses the 6.2 PCM and a different engine harness, so it wouldn't requiring having to change out a bunch of extra items.
 

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
17,583
Reaction score
27,084
If you get the swap kit it sounds like there's nothing "extra" needed. It uses the 6.2 PCM and a different engine harness, so it wouldn't requiring having to change out a bunch of extra items.
Regardless of which way you go, will your transmission be able to handle it? I’d hate to see you get up and running, only to suffer a transmission failure soon after.
 

EricM

FRF Addict
Joined
May 11, 2016
Posts
3,500
Reaction score
3,235
Location
OHIO
6R80 and 10R80 are rated for the same torque. That's the "80" part. Ford is cool with putting the 10R80 behind the 735 HP Raptor R.
 

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
17,583
Reaction score
27,084
6R80 and 10R80 are rated for the same torque. That's the "80" part. Ford is cool with putting the 10R80 behind the 735 HP Raptor R.
I’m sure there are some upgrades, as there are with the 10 speed in the PSD super duty. And I’m not talking about the warranty or expectation, we’re talking about supercharged v8 of TBD displacement. IMO the 7.3 n/a crate engine would probably do great. Like I said, I don’t want to see someone make the same mistakes I did at 18.
 

EricM

FRF Addict
Joined
May 11, 2016
Posts
3,500
Reaction score
3,235
Location
OHIO
I’m sure there are some upgrades, as there are with the 10 speed in the PSD super duty. And I’m not talking about the warranty or expectation, we’re talking about supercharged v8 of TBD displacement. IMO the 7.3 n/a crate engine would probably do great. Like I said, I don’t want to see someone make the same mistakes I did at 18.
It might go 100K, it might blow in 1 day. Who cares?

A fully billet, race ready everything 6R80 is less than $10K, and the trans is easy to swap compared to any of the other AWD vehicles on the road nowdays.

You aren't even paying the taxes on a Raptor R in most states with $10K.
 

pcs

Member
Joined
Nov 8, 2024
Posts
29
Reaction score
36
Location
milky way
I’m sure there are some upgrades, as there are with the 10 speed in the PSD super duty. And I’m not talking about the warranty or expectation, we’re talking about supercharged v8 of TBD displacement. IMO the 7.3 n/a crate engine would probably do great. Like I said, I don’t want to see someone make the same mistakes I did at 18.
the 10 speed trans in the superduty is the 10r140 in the 1/2 tons of the 10r80. not the same transmission.
 

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
17,583
Reaction score
27,084
the 10 speed trans in the superduty is the 10r140 in the 1/2 tons of the 10r80. not the same transmission.
Note that I did not ID the super duty as a 10R80, I said “10 speed” ; Thanks for filling in the specifics, I’d forgotten the designation.
 
Top