37PP stock is dead level... anyone else?

[ihoffland]

I run a little lighter psi in the rear to accommodate for less weight. That being said, I do notice a little rake. Not much, and imo it’s the perfect look. I don’t haul much other than random home construction projects, and at that point if it sags a bit it’s not the end of the world.

If you need to haul weight regularly you’ll want to upgrade to a stiffer spring.. or add an airbag system.

 

[Kotykb]

My 37 was 42 1/4 front and 43 3/4 rear after driving it for 6 months. after rpg 1.5 perch collars I’m now at 43 3/4 front and 43 7/8 rear.

Do you mind posting some side shots of your truck before and after installing the RPG 1.5" collars please? Thank you!!!

 

[murphyraptor]

 

[murphyraptor]

First pic is after the collars but there is some stuff in the bed which makes it around 1/2 inch plus lower than normal

 

[Syberspace]

Even with the same psi front and rear it still will not be accurate from the floor.

My point is it took the measurement from the same spot with the same psi. Now confirmed it to the hub center... same thing.

 

[slivoman]

My garage opening height is 81" if that helps.

That helps a ton..thx

 

[SMIKE]

I have a 35" truck but the 37" package that was in my shop that I measured was 3/4" higher in the rear on the passenger side and 1/4" higher in the rear on the driver side with half a tank of gas or so. There are also 1/2" rear spacers available.

Level Up Suspension 1/2" Rear Spacer [21+ Raptor]

These rear spacers will add ride height to the rear of your Ford Raptor. Whether you are looking to compensate for weight in the bed or match a front lift height, these are the perfect solution. These are also stackable, add a second pair for 1" of rear lift height Features: 1/2" of lift height...

www.levelupsuspension.com

 

[Syberspace]

I have a 35" truck but the 37" package that was in my shop that I measured was 3/4" higher in the rear on the passenger side and 1/4" higher in the rear on the driver side with half a tank of gas or so. There are also 1/2" rear spacers available.

Level Up Suspension 1/2" Rear Spacer [21+ Raptor]

These rear spacers will add ride height to the rear of your Ford Raptor. Whether you are looking to compensate for weight in the bed or match a front lift height, these are the perfect solution. These are also stackable, add a second pair for 1" of rear lift height Features: 1/2" of lift height...

www.levelupsuspension.com

I am going to machine my own spacers. Plan on doing it next weekend... will report back once installed.

 

[DMays]

Mine is 3/4" higher in the rear with my yakima rack and basket in the bed and two gunner kennels. Was just over 1" higher with the bed empty.

 

[csantarcangelo]

My garage opening height is 81" if that helps.

Specs say the 37 is 80.7"

Not sure I'd risk 81". The minimum clearance I'm comfortable with in my 37 is 6'10"