2024 Raptor Quality issues

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

IWantARaptor

Member
Joined
Jun 19, 2022
Posts
19
Reaction score
31
Location
DFW
I am in the process of buying a 24 801A from an out of town dealer and having delivered. Assuming I have some of these issues, will my local dealer be willing to help me out under warranty or would most of these things be out of scope unless under recall?
 
Last edited:

fkim119

Active Member
Joined
Dec 24, 2014
Posts
90
Reaction score
76
Location
Irvine
My Raptor went into the dealership for my paint cracking on the hood and rear door seal coming down.

I was informed there was also a recall on a part involving the AC for 2024's that will be performed this time in service.
 

Quicksilver45

Member
Joined
Jun 29, 2024
Posts
12
Reaction score
19
Location
Macon, GA
Mines a 5/28 blend date and it's a lot better built than the 22 Lariat I had. Yeah, the door cards and seating surfaces are kinda cheap feeling but build quality on mine looks good for the most part. However, there is a small issue with a rear fender and passenger side door fitment. The body shop says they will be easy to remedy.
 

Attachments

  • IMG_6962.jpeg
    IMG_6962.jpeg
    236.8 KB · Views: 72
  • IMG_6961.jpeg
    IMG_6961.jpeg
    124.5 KB · Views: 71

Jafo2317

Active Member
Joined
Apr 14, 2020
Posts
57
Reaction score
14
Location
TX
Loose wrinkled leather on driver and passenger seats. Dealership has approval from Ford to remove and adjust for the first step. If it doesn't work it'll need to be replaced completely. 200 miles on 2024 Raptor
 

tm965

Full Access Member
Joined
Mar 31, 2021
Posts
576
Reaction score
736
Location
NOVA
my 21 has the same wrinkle in the same spot on the right side of the seat... never bothered with it and its no worse for wear
 

Wartman

Member
Joined
Jan 13, 2024
Posts
21
Reaction score
6
Location
Canada
Does anyone have a gap in the trim above the glove box area (please see attached pic). I thought it wasn't put together correctly from the factory, so I took it to the dealer to fix. They agreed it wasn't right and ordered some new trim. After they replaced it the gap is still there. I had them come out and look at the truck with me and they assured me all the clips were seated correctly, but I just wanted to confirm. Anyone else have a gap like this or is it seated correctly? Thanks!
 

Attachments

  • PXL_20240501_235102942.jpg
    PXL_20240501_235102942.jpg
    118.8 KB · Views: 80
Top