2021+ Raptor (Including Raptor R & 37P) OEM Fog Light Kits

[4x4TruckLEDs.com]

So we're happy to announce that after some testing our KR Off-Road OEM Fog Light Brackets work with the new 2024 Raptor R (and 37P).

We've been doing some testing in-house on the Raptor R and wanted to verify our bracket fitments. There were some slight differences but we've re-vised our brackets to now work across the board with all of the Bronco & F150 Raptor platforms.
So whether you have a Bronco Raptor, or a 2021 F150 Raptor or a 2024 F150 Raptor or even a 2024 F150 Raptor "R" our kits will work.

https://www.4x4truckleds.com/baja-d...21-ford-f-150-raptor-2021-ford-bronco-raptor/

INCLUDES

• 2 Pairs of KR Off-Road Brackets
• 2 Pairs of Baja Designs Lights
• 2 Pairs of Pigtails
• Instructions

FITMENT

• 2021+ Ford Bronco Raptor
• 2021+ Ford F-150 Raptor (All Trim Levels Including 37P and Raptor R)

What's nice about our kit is that we use pigtails that plug directly from the light into the OEM wiring. No additional harnesses required to change the TYPE of plug. We always provide the correct harness for the lights you guy. So that means Baja Designs lights get our Baja Designs pigtail for the OEM connection. Diode Dynamics lights get 1 of 2 styles of harnesses (depending on back lighting or not), etc... - It makes for less wiring and a cleaner install.

Here are the pigtails we include with our Baja Designs kit:



A nice clean plug and play installation.

This fog kit will replace the existing Rigid lights with Baja Designs lights. This will give you more light AND better patterns. You can do 2 sets of SAE (one in white and one in yellow) OR go with one set of SAE fog lights and 1 set of off-road lights (S2 Pro Driving/Combo for example). It's a nice clean installation that allows you to orient the lights up/down/left/right so you can focus that beam where you want.

We also ensure that the lights don't protrude any further then the Rigid lights protruded (nothing worse then seeing a fog kit where the lights are just sticking so far out like a crazy cartoon character). Takes away from that CLEAN look.

Here are some shots of us testing things out on a Raptor R





Order your kit here: https://www.4x4truckleds.com/baja-d...21-ford-f-150-raptor-2021-ford-bronco-raptor/

 

[Goeddgr]

Kit still says “pre-order now”. Do you have an anticipated ship window?

 

[4x4TruckLEDs.com]

Kit still says “pre-order now”. Do you have an anticipated ship window?

Our new brackets will be here I believe next week. They are at powder coating now.

 

[Subaruski]

Solid looking setup and this kit appears to be less expensive then competitor's kit.

Can you post a picture of your bracket?

 

[4x4TruckLEDs.com]

Solid looking setup and this kit appears to be less expensive then competitor's kit.

Can you post a picture of your bracket?

Yes we're priced slightly under Baja Designs own kit. And our brackets are a bit beefier then Baja Designs kit.

Baja Designs kit would cost you $679.95 for 2 pairs of S2 SAE: https://www.4x4truckleds.com/baja-d...pocket-kit-for-2021-ford-f-150-bronco-raptor/

Our kit would cost you $677 and you could select two different SAE colors: https://www.4x4truckleds.com/baja-d...21-ford-f-150-raptor-2021-ford-bronco-raptor/

We'll have new photos when the final product comes back from powder coating but here is an earlier prototype from a few weeks ago to give you an idea

 

[4x4TruckLEDs.com]

Kit still says “pre-order now”. Do you have an anticipated ship window?

We'll be shipping pre-orders starting this Friday FYI.

 

[4x4TruckLEDs.com]

Kits are IN STOCK FYI and shipping out right away!

Check out some additional photos/instructions or the BUY link here:

https://kroffroad.com/product/30-2005/

 

[Arizona Free]

Anybody installed these yet and ready to report to us?

 

[4x4TruckLEDs.com]

Anybody installed these yet and ready to report to us?

We only started shipping them last week so we still have kits in transit.

I can tell you though compared to the regular Baja Designs kit our kit is a lot more secure and gives you more adjustability. We installed a regular Baja Designs OEM kit yesterday on a customer's truck and had no adjustability up/down other then a TINY BIT. With ours you get a lot more adjustability.

 

[Arizona Free]

Ok. I will wait until I see a real install