2021 AB 37 PP - 38's Upgrade

[ToadSmasher2K1]

They’re more than likely E rated if they’re 20’s. That’s the source of the rough ride. Lowering the pressures might help slightly, but E rated tires blow.

 

[ToadSmasher2K1]

12 ply + E load + 90 lbs each = poor ride

38’s look good though

 

[BaseModelRaptor]

 

[GDITheMan]

Maybe you should have bought a Black Widow instead. That's basically what you have now.

 

[kandewinn]

Can I ask where you got that raptor bedside decal?

Thanks

It’s the factory 37 decal that covers the whole bedside.

 

[Christian92]

Can I ask where you got that raptor bedside decal?

Thanks

It's part of the optional decal pack with the 37 package. If you look reaaal close on the bedside rear it'll show the "37" as well.

 

[Christian92]

What are the tire pressures set at?

Tire shop installed at 46 at that was too much since the sides weren't touching pavement, so I changed them to 40. I do see some sag though so maybe going to test 42 and see if that's a happy middle ground.

 

[Christian92]

12 ply + E load + 90 lbs each = poor ride

38’s look good though

View attachment 438116

That makes sense. Coming from a Jeep that rode like a school bus, ride is still better lol. Can't beat stock tire ride though.

 

[Nex]

Tire shop installed at 46 at that was too much since the sides weren't touching pavement, so I changed them to 40. I do see some sag though so maybe going to test 42 and see if that's a happy middle ground.

That's still to high. I am running 32F/30R on my 37s. Some run lower.

 

[Christian92]

That's still to high. I am running 32F/30R on my 37s. Some run lower.

That's interesting. I'm gonna have to try that and see how it affects ride quality if any.