2012 Raptor Engine Harness

[Ceetee1964]

I have a 2012 Raptor and the harness in the engine bay, the one with the fuse box, needs replacing. It is now a discontinued part and wondered if anyone could point me in the right direction. Part number is CL3Z-12A581-VB
Thank you.

 

[mprice1234]

Can't believe the whole harness is bad. Looking for it show discontinued part everywhere I looked. I think you would be better off repairing the harness then replacing it. Why do you think the whole harness needs to be replaced? What is wrong, details would be helpful.

 

[TomDirt]

So that means if a Gen 1 Raptor has an engine fire, there's no replacement electrical harness specifically for the Raptor from the factory? Why not use a regular 2012 F-150 harness (for a 6.2l version) instead, then add the 4 auxiliary switches and traction mode instead? If I was the mechanic and didn't have time to re-engineer the thing, that's what I'd do. The "generic" version is pretty cheap on eBay:

 

[Ceetee1964]

Can't believe the whole harness is bad. Looking for it show discontinued part everywhere I looked. I think you would be better off repairing the harness then replacing it. Why do you think the whole harness needs to be replaced? What is wrong, details would be helpful.

The general part of the harness is fine but I have been told the fuse box and pcb in the fuse box is badly corroded. The truck started throwing up loads of random faults. I’m in the UK and trying to find someone to repair I thought would be harder than just getting the harness but that may not be the case now. Any assistance would be appreciated.

 

[Ceetee1964]

So that means if a Gen 1 Raptor has an engine fire, there's no replacement electrical harness specifically for the Raptor from the factory? Why not use a regular 2012 F-150 harness (for a 6.2l version) instead, then add the 4 auxiliary switches and traction mode instead? If I was the mechanic and didn't have time to re-engineer the thing, that's what I'd do. The "generic" version is pretty cheap on eBay:

Thanks for that steer I’ll have a look at that.