Huge difference. Huge. I’ll shoot a photo of them with the daytime running lights on. They are really sweet. Bought them sight unseen. Been very impressed. If they last then it will be the best addition I have made to the truck.
Sent from my iPhone using Tapatalk
I had the same issue! Replace my tie rod with an aftermarket and the boots they sent me were way too big. So I ordered the OEM and trimmed them to fit. Insanity.
Sent from my iPhone using Tapatalk
Correct. No flange bolts. Just did this to mine on both sides. Remove the wheel and dust cap and the nut that holds the axle to the knuckle. Axle just pops out. There is a ring clip that holds it in place that is not visible until you pop it out.
Sent from my iPhone using Tapatalk
I’d be curious to hear if this is it. I got up under mine and the heat shield was loose. Tightened it down and I still have a rattle. So that wasn’t the culprit.
Sent from my iPhone using Tapatalk
Ok thanks. Just looking for the most robust scanning tool. Not looking for any specific issue just want to be able to find one if need be.
Thanks
C
Sent from my iPhone using Tapatalk
This is a great thought. And it might be what is causing yours but not mine. I took both skid plates off mine and drove it and it still made the noise.
Sent from my iPhone using Tapatalk
Don’t know if this helps but I have the Fox 3.0’s and I hear a rattle too. Have heard it from day 1. I did the install and also put in Icon UCAs and new hubs, tie rods, and CV axles. Don’t notice any performance issues but it rattles and I have tightened everything down.
C
Sent from my...
MTF how does your truck sit? I just installed the Fox 3.0 shocks front and rear and am going to add the deaver HD’s. Want it to sit level. Should I go +2 or +3?
Thanks!
C
Sent from my iPhone using Tapatalk
Given the option to have a 6.2L in the Gen 2, I’d be curious to see how many Gen 2 owners would opt for it. On the contrary, if you asked Gen 1 owners if they would want the Ecoboost V6 in their Gen 1, I think all you would hear are crickets. To each their own. The guy wanted a Gen 1. Congrats...
Has anyone replaced the exterior door handles? How difficult is it? I had the door panels off installing sound dampening material and was wondering what it would take to replace them.
Thanks!
C
Sent from my iPhone using Tapatalk
Another picture from the driver side. You can see the hole to the bracket almost lines up with the hole in the beam. That doesn’t seem right. How am I supposed to drill a hole where there is already half of a hole?
Sent from my iPhone using Tapatalk
Please see the attached photos. I have the rigid industries bracket and it doesn’t seem to be fitting properly. 2012 Raptor. The straight edge is lined up with the beam at the step down. There isn’t any room for the light to move up or down. It is sitting flush on the bumper. Anyone else have...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.