You need to plug the front hole on the air box, where the ram air tube connects, your sucking hot air from under the hood at that spot.
3" pipe cap from homedepot, lowes
I used heat shrink connectors, like these.
http://www.westmarine.com/webapp/wcs/stores/servlet/Product_11151_10001_35679_-1?ci_src=14110944&ci_sku=35679?cid=sc_bingpla&device={Device}
If you don't get pictures, just pull your head light out, you will see were the maker light is, and see were your wiring is gonna go straight to the side vent.
Best visual and hands on.
Hey J,
What amount of oil is your Moroso catching on the drivers side?
Some have stated that not much is going thru on the drivers side.
I will install one on the drivers side too if it needs it.
Nothing on the drivers side, bone dry, I check them every 4-6 weeks, passenger side gets 2 oz at...
Doesn’t make a difference if it were 0 degrees, as long as whats in the can is below inlet and out let its gonna breath, if it were close to the top and froze then expansion could happen and block the motor from breathing, if it was full and not frozen, it would be like not having a catch can...
That to me sounds like lack of maintenance, letting it get over filled, causing the problem, also mounted in a good location, it should of defrosted from the heat under the hood.No problems with my moroso's But to each there own.
The one's listed are 120 degree, on the underside of the bed rail, for those who are not familiar , there is a 3/4 wide area ,about 45 degree angle that's your best mounting point, for the best light.
Here's a ebay link for 10, works out good, 5-per side
5050 SMD Waterproof IP65 Modules 10pcs 51 57mA 3LED Pcs Super Bright 12V AA | eBay
Here's a ebay link for 20
20pcs 10 Feet Cool White 3LED Module Waterproof U s Seller | eBay
These are us seller's , if you don't mind the wait, you can...
The volant is a great CAI, the problems that some of us had, were due to getteing older stock/set-up's that venders had before the correction on the bracket, I took alot of picture's and measurements, and chris-(freedommotorsports) did the leg work with contacting volant, and the turn out was...
Wasn't sure were to post this, but thought it was a good find for anyone in that area looking, this truck is all done, from engine to body, kinda looks like a truck that was posted here, but could be wrong with the milage it has.
Ford F 150 Raptor | eBay
I have the metal mulisha on my 2011, all I did was place a 4x4 block on top of my hyd jack plate and jacked it up under the trailer hitch , untill the suspension was fully unloaded, then pulled it out in one piece.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.