Thought i would share this as Fords can be driven away without the key and will operate normally until shut off
Full description how the crime works here http://www.itv.com/news/central/2017-11-26/police-release-footage-of-relay-crime/
https://youtu.be/HZIfEWVBXw4
Be a good idea to keep...
Ive had spacer blocks (came on my used raptor) switched to midperch... the ride quality is negligible.
Say no to spacers
Sent from my iPhone using Tapatalk Pro
Installed blackvue dashcam. Did a fuse tap and total installation was simple. Hard pressed to believe there is anything better. Love the live view, will be fun using that rear cam with my ipad
Sent from my iPhone using Tapatalk Pro
Coyote wiring harness from ford racing https://fordracingpartsbydonwood.com/electrical-parts/wiring/controls-pack-2011-14-coyote-5-0l-4v-ti-vct-manual-transmission-m-6017-a504va/?gclid=Cj0KCQjw4eXPBRCtARIsADvOjY2TobjM-BsGYTkash_a44metc-5kHE-y6cB_LkaNR0v8jSvUv5Wa_kaAgi9EALw_wcB
Sent from my...
Its this. https://www.suspensionconnection.com/55384-ford-f150-curt.html?gyear=2012&gclid=Cj0KCQjwvuDPBRDnARIsAGhuAmbrP27bESYK42MPDP9Gvm2ckTBfe_6qW7nvyw504V74VZlz7W-7sBMaAiiIEALw_wcB
Sent from my iPhone using Tapatalk Pro
Sorry without doing it again and taking and making instructions on the way this is the best i can do for now
This is whats inside the billet aluminium box. There are 12 total wires (6 pairs) positive and negative for the left and right sides for the red, yellow and white.
I just cut the...
its really just a direct wire. each color has a left and right and positive and negative. so 12 total wires. the reverse is tapped into the center of the 7 pin, (stop, left and right) just go to green and yellow. and the ambers i ran a wire up through the frame to my upfitter 2 switch wire.
if...
(+2) = same height as (+3 with drop shackle)
however (+3 with drop shackle) with have more suspension drop... meaning more travel.
i think that is the way to go... if you ever want or need that extra inch in the back, you could always put the stock shackles back in
Sent from my SM-G950U using...
its the circuit control board. necessary for an easy plug and play. it dims the red for running lights as well as making the yellow operate "as they should", among other things.
Sent from my SM-G950U using Tapatalk
Installed my putco blade (with a couple mods)
Got rid of this pesky thing (*putco circuit board)
Hooked up the ambers on upfitter 2 for dust
Then made the turn signal red (instead of yellow)
And of course the reverse light
I have to say, wow... They are all really bright, pictures don't do...
Yeah to make the red work as it should... You would just need to remove the amber and jump the (yellow and green) over to that circuit.
The red without the box is full bright, so to get the running lights they are reducing the voltage i assume
Sent from my iPhone using Tapatalk Pro
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.