Search results

Great question, It's an investment when purchasing these. I feel that it's really important to make sure that the shocks are tuned for you. We have 6 different valve codes that we use for the fronts without the DSC's none of which are in the "Fox book" ... We are more then willing to go...

Superchargers are awesome. Massive power for very little money compared to a completely built motor. About $30,000 for a completely built motor with the same amount of HP as a Roush Supercharged truck. Both running on pump gas. If your going to build the motor (crank, rods, pistons etc.) use...

Luke. I have tried to call your phone number that we have on file for you, but it has been cancelled. I have not received any phone calls, voice mails or emails from you. We have two phone numbers that you can call: 866.691.7750 and 949-444-3213. Steve, I tried to introduce myself to...

Give Ben at National spring a call. (619) 258-2724

What size hammer are you using?

Hey hey, It may help to watch the RPG tie rod video. Using this method, I have not had one that didn't loosen up. I hope that this helps.

Fox 3.0 Extended 29.41" Travel 11.5"

Pin it to win it

Thank you so much for the invite. This place was a blast. So much fun to see the different types of terrain. I felt like a tourist. Pulling over off the track and taking pictures. I am excited to come back next year.

I am glad that you were able to come along for the ride. Right place at the right time. Remember. "Just breathe"

Laugh out Loud!! ;)

6 on 6.5" Trophy truck bolt pattern. The rear end can be modified to accommodate 6 on 135mm. I would just highly recommend changing wheel stud diameter.

Yes. Typically require more weight to balance. One of the difficulties is that the bead lock ring floats on the bolts. There are no dowel pins to keep it centered. Let me know if I need to elaborate.

All she needed was a bath and an air filter. Tomorrow the KRT's come off and the KM2's go back on. BFG's are amazing. I deserve so many flats.

No problem Charlie, The water jet and CNC work cost me the same amount for 1 as it is 20. So I ordered 20. The only difference was material. We will put 6 of them with your name on it. See you tomorrow night.

Hmmmm. Rear ARB. I've only seen one other raptor with that. It came off after nationals were put on.

Knowing how much power the truck has and how susceptible the stock aluminum is to dents/ dings / failures we opted to custom make the shaft for this truck. It was a 1410. ( same cross height as a 1480 just a smaller pin). The joint didn't fail. The plunging section ripped apart. The...

There is only 1 "mass damper". It is located on the drivers side. It is functional "doohickey". It works really well in text books. ;) it changes the natural frequency of the chassis. I take our off as soon as I have the opportunity. Much easier to remove when the bed is off. But...

Note to self. Today was about loosing your nuts. 1. Lug nuts 2. Lower control arm nuts What an awesome ride it was. Thanks Kirk for setting this up.

So what does your business card say in regards to frf?

Kingpin inclination has NOT changed. Wheel offset has.

Truck loaded up and ready to go

Chris Ross truck heading home from SEMA to RPG.

Brian just sent me a picture. So here you go.

The ladies and gents are out playing in the dirt. Everyone has a smile and a thumbs up.