Raptor Lean

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

p3rs1st

Full Access Member
Joined
Mar 13, 2012
Posts
107
Reaction score
30
Location
Davenport, IA
Rear passenger side well sitting 2" higher than rest

Anyone seen a similar issue? I've recently gotten a mid perch but I'm not sure if this problem existed before or not. Every wheel well measures about 42.5" off the ground except the real passenger side is at 44" even. I'm wondering if the shocks may be off or something??
 
OP
OP
p3rs1st

p3rs1st

Full Access Member
Joined
Mar 13, 2012
Posts
107
Reaction score
30
Location
Davenport, IA
Well.. I haven't measured but I'm sitting at about 5 gallons left in the tank and it's still pretty noticeable. I'm going to try and get my head in there and measure anything I can think of to compare on each side

Any other ideas?
 

Huck

FRF Addict
Joined
Aug 26, 2012
Posts
4,208
Reaction score
1,839
Location
Chicago Sw Burbs
Measure from the bottom of the rim to the fender well. Then you ignore tire pressure and all that, get a more accurate measurement.
 
OP
OP
p3rs1st

p3rs1st

Full Access Member
Joined
Mar 13, 2012
Posts
107
Reaction score
30
Location
Davenport, IA
OK - measured from the bottom of the rip and also the center of the rim, the rear passenger is still about 2.0 - 2.5 inches higher.

Next I was able to measure how much of the shock bypass was sticking out past the black brace it's sitting in. On the rear passenger side there's about 1.25" - 1.5" more sticking out so that definitely seems to be part of it, if not all of the problem.

See pics

Thoughts?
 

Attachments

  • 20130205_190252.jpg
    20130205_190252.jpg
    27.2 KB · Views: 144
  • 20130205_190335.jpg
    20130205_190335.jpg
    28.5 KB · Views: 155
Top