Your Raptor and It's Alignment

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
pirate air

pirate air

will plunder your booty
Supporting Member
Joined
Jul 11, 2010
Posts
4,253
Reaction score
1,379
Location
Texas
Just ask for the spc f150 cam kit. You'll need two boxes because one box does one side.
The part number is 86250
 

CSmith

Full Access Member
Joined
Oct 4, 2011
Posts
209
Reaction score
39
Gotcha. two boxes, two for each side for front and backs. Really appreciate your help. Just got brand new tires on and don't want to ruin them :D
 
OP
OP
pirate air

pirate air

will plunder your booty
Supporting Member
Joined
Jul 11, 2010
Posts
4,253
Reaction score
1,379
Location
Texas
Gotcha. two boxes, two for each side for front and backs. Really appreciate your help. Just got brand new tires on and don't want to ruin them :D

No problem! Just make sure the lower control arm bolts get TIGHT. Although I've hade zero issues, others on the forum are having mixed feelings on the cam kits but I think it's just a matter of improper tightening. Some are even adding Loctite which isn't a bad idea.
 

Big Blue

Administrator
Staff member
Admin
Supporting Member
Joined
Aug 1, 2011
Posts
4,263
Reaction score
7,505
Location
USA
Here are my results. The "Before" is after coming back from Havoc.

Drives great now.

image_zpsc1ea43f6.jpg
 

CSmith

Full Access Member
Joined
Oct 4, 2011
Posts
209
Reaction score
39
So I went to the alignment shop and they said it was maxed out. What should I do now? They were somewhat ******** and thought they were cool so of course they didn't help me further. I'm worried my tires are going to start wearing and I JUST got them.

205uqhg.jpg

2yjuipy.jpg
 
Last edited:

CSmith

Full Access Member
Joined
Oct 4, 2011
Posts
209
Reaction score
39
They said what would be the point of a cam kit if this is already maxed out? They said it wouldn't make it go in any further.
 

Madcowranch

Genetically Modified
Joined
Sep 16, 2010
Posts
7,303
Reaction score
5,168
Location
OK
They said what would be the point of a cam kit if this is already maxed out? They said it wouldn't make it go in any further.

You are going to have problems if you stay on top perch with your '12.

And go find another alignment shop.
 

CSmith

Full Access Member
Joined
Oct 4, 2011
Posts
209
Reaction score
39
I haven't had any problems at all. Running about 30k miles and my 4 wheel drive is fine for now. I'm about to take it to a different shop.
 
OP
OP
pirate air

pirate air

will plunder your booty
Supporting Member
Joined
Jul 11, 2010
Posts
4,253
Reaction score
1,379
Location
Texas
So I went to the alignment shop and they said it was maxed out. What should I do now? They were somewhat ******** and thought they were cool so of course they didn't help me further. I'm worried my tires are going to start wearing and I JUST got them.

205uqhg.jpg

2yjuipy.jpg

What did the final measurements come out to? Did they give you a print out? You can still get good tire wear at top perch but you have to sacrifice some caster or get adjustable upper control arms.
 
Top