Xmitter Prime Xtreme Light Bar mounting help

[Biggest]

I'm looking for a solution or suggestions on mounting a 40" Xmitter Prime Xtreme Light Bar on my ADD bumper that's set up with tabs that accommodate the Rigid E series bar.
The Rigid has end mounting and the ADD bumper is fabricated with end mounting tabs.
The vision x bar has bottom mounts. Any easy solutions?

 

[Ni9mm]

Return the x mitter and buy a Rigid. That right there is an easy solution.

 

[Raptor911]

You have no choice but to weld tabs in the middle of your bumper. Don't forget the mounts on the visionx bar moves/slides along a track so you don't have to be exact with your tabs as you can adjust with the light itself.

 

[justvettn]

In your case I would just get the Rigid and keep things simple.

 

[Trevor*]

Can you take a picture of the light? I had the same problem in the past. If your light is like the one I had (different brand) I have a solution if the spacing is correct.

 

[nohel]

Go buy yourself some taps and cut the old ones off and weld the new ones on problem solved.

 

[Sitdown]

A piece of flat stock with 2 bends can suffice too...30min project

You have a great light, no need to downgrade