WTB - Bed cage

[Jimbo]

Still pondering this. Can't decide if I want the vertical tire carrier or go with one in the bed and one under the truck since I'm getting the BakFlip....

 

[onesickpuppy]

Make your own @Jimbo

 

[treypal]

I have one I'll sell.

Holds 1 spare, 1 5 gal dump can, 2 8 gal action packers and a 45qt yeti.

PU at TRR

---------- Post added at 09:11 AM ---------- Previous post was at 09:08 AM ----------

 

[Jimbo]

Make your own @Jimbo

I'm not mechanical. I like to supervise

However, I know plenty of guys that have made their own. I'm just stuck on if I want the vertical for more bed space (and remove tonneau when running tires in it) or run a single spare in the bed and another in the stock location.

---------- Post added at 09:13 AM ---------- Previous post was at 09:12 AM ----------

If only it held 2 spares @treypal

 

[treypal]

I'm not mechanical. I like to supervise

However, I know plenty of guys that have made their own. I'm just stuck on if I want the vertical for more bed space (and remove tonneau when running tires in it) or run a single spare in the bed and another in the stock location.

---------- Post added at 09:13 AM ---------- Previous post was at 09:12 AM ----------

If only it held 2 spares @treypal

Funny thing about Raptor runs. Everyone carries 2 spares and all of the trucks use the same wheel pattern...

 

[Jimbo]

Funny thing about Raptor runs. Everyone carries 2 spares and all of the trucks use the same wheel pattern...

I know... If I went with the one spare setup, I'd do a undercover system to keep the tonneau in place.

 

[treypal]

I know... If I went with the one spare setup, I'd do a undercover system to keep the tonneau in place.

But how would you get to the Yeti?

 

[Jimbo]

But how would you get to the Yeti?

I have a SCREW, keep it in the backseat OR flip the tonneau all the way up and get to it. If I'm not feeling any of it, I find your truck, and grab drinks out of your Yeti.

 

[Deleted member 12951]

I have one I'll sell.



Holds 1 spare, 1 5 gal dump can, 2 8 gal action packers and a 45qt yeti.



PU at TRR

---------- Post added at 09:11 AM ---------- Previous post was at 09:08 AM ----------

No spot to hold a 2 ton jack?

 

[treypal]

No spot to hold a 2 ton jack?

Bottom pic you can see the jack mounted. I used airline track and track studs that I found online. Mount and skid were built by FMI.

---------- Post added at 09:20 AM ---------- Previous post was at 09:19 AM ----------

Selling this one because we're building a new one that has a fuel tank built in.