Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Gopher870 - my 2020 raptor has developed a nasty rattle in the shifter area. If I apply a slight amount of upward pressure from the gear selector boot - the rattle stops. Your photos of the area deconstructed peaked my curiosity. Any other tips for taking this area apart? Or back together?This is what the area under the shifter looks like. There is a lot of room and little to no intrusion into the space between the console and gear selector. Taking apart this area is very easy and all plastic pieces snap fit together. Taking the shifter stalk cover off involves removing two screws located on the stalk on the hood side of the stalk. I never took apart the area encompassing the cubby and cannot offer advice there. Good luck.
Entire Area: View attachment 167008
Closeup toward the front of area directly next the the gear selector in Park:
View attachment 167010
Underside of bezel that would cover the area around gear selector:
View attachment 167012