GEN 2 Winter wonderland in Maine

[Rollofire]

-8F, wow that's 38 degrees colder that my freezer!

 

[copb8]

-8F, wow that's 38 degrees colder that my freezer!

You're going to want to get that freezer fixed.....

 

[sixshooter_45]

Me too & that’s why I asked & looks like made my mind up. I’m guessing the +3s would ride better unladen than +3HDs & the way that sleds in his bed the majority of the weights over the wheels too- if it was gonna sag it would.

5-600 usually what I load up w/ + 1200-3500 lb jet ski trailer

Yeah, I was going to go with HD also but now I'm not so sure.

 

[xrocket21]

Looks good! Spent the day Monday sledding out here in WY. The snow was light and deep. My sled is a little longer...

Not too much podwer out here!

 

[robert berry]

where in Maine r u . I'm in Unity .

 

[onthebrake]

2.25" collars up front, Deaver +3's in the rear. Sled only weighs like 500 lbs.

I'm assuming they removed the 2'' blocks in the rear for the 3+ Deavers ?

 

[xrocket21]

where in Maine r u . I'm in Unity .

Nice! My mom lives in Albion!

I live out toward Farmington!

If you ever want to do some off roading let me know!

 

[xrocket21]

I'm assuming they removed the 2'' blocks in the rear for the 3+ Deavers ?

Who the hell are they?

Yes, I took the blocks out when I installed the Deavers. This removes your bump stop pad which must be replaced with a new pad or a bump stop setup. I went with new pads.

Out with the old



In with the new

 

[sixshooter_45]

Who the hell are they?

Yes, I took the blocks out when I installed the Deavers. This removes your bump stop pad which must be replaced with a new pad or a bump stop setup. I went with new pads.

Out with the old



In with the new

How difficult would you rate this job on a scale of 1 to 5 wrenches?

 

[xrocket21]

How difficult would you rate this job on a scale of 1 to 5 wrenches?

Hmm, it depends on your abilities.... But it isnt a hard job. I did it in a couple hours, maybe 3? It is kind of a 2 man job as its all pretty heavy. But its only 8 nuts and 4 bolts/nuts. You will need a cutoff wheel to cut 2 of the bolts.

Im gonna say 2 wrenches?