Will 39's fit without mod?

[Frank N]

Sorry, I just wanted to be the first... LMAO

I'll be sticking with the 37s.

 

[CoronaRaptor]

It was inevitable , lol
Congrats

 

[zombiekiller]

yes, you can fit at least 4 in the bed. no mods required.

 

[Gdog]

Oh sure I would go with 20" wheels and 40's. No mods required at all.
Buddy of mine did this on his powerstroke. Only needed a 6" full suspension lift. Looks awesome but a completely different platform.

 

[Johnkn]

What I will try immediately is KM3s in 37x13.5x17 (vs 12.50)

 

[wweaver]

Just got my order in for the 2021 with 37 package, will be interesting to see if the “larger” 37s fit. Not just 13.50 wide but true 37s not just the BFG at. The weight will suck on some however. Some 37/12.50/17 Swamper SSRs would look pretty bad ass on the Gen 3. Old and new tech for sure there. Not much for 38s around either and again so heavy. Thinking Toyo MT 38/13.50/18 is the only 38 that’s not stupid wide that iam aware of, but heavyyy.

 

[MurderedOutSVT]

A little trimming

 

[Frank N]

A little trimming

 

[wweaver]

Oh I cannot wait for the how to fit 38/39s on the 37 package threads, that one for Gen 2 was painful for fitting 37s. It’s hard to tell from pics how much more room there is the Gen2 or if it’s similar with limited up travel. Has to be another inch Of room or so behind the tire however.

 

[robopop]

I’ve put Nitto ridge grappler 38x12.5 on my 2021 raptor. A little rubbing when bottoming out the rear end. Tight fit but otherwise works. Haven’t figured out if I’m going to trim some, do a small lift or go back to 37’s…

Spare does not fit under the truck anymore..,