Wicked front

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

pat'sRAPTOR

FRF Addict
Joined
Jul 17, 2011
Posts
5,590
Reaction score
2,068
Location
Everywhere
Nope the grill and hood would have to be changed out and if you change that all out then you have to change the fenders cause the goods to big it's a big project but I have seen people do that to regular f-150's bit they were a lot new than 07 they were like 11 or 12's and they spent a lot offset doing it.
 

BIRDMAN

Birdministrator
Joined
May 16, 2010
Posts
12,915
Reaction score
6,196
Location
Boston
I believe he is asking if his wicked performance bumper will fit an 07. And the answer is no. It will be too wide and that's even if the frame horns line up to mount it.

Sent from my thumbs using Tapatalk 2
 

Danactive

I'm Back!
Joined
Aug 22, 2012
Posts
1,455
Reaction score
313
Location
Syracuse, NY
I believe he is asking if his wicked performance bumper will fit an 07. And the answer is no. It will be too wide and that's even if the frame horns line up to mount it.

Sent from my thumbs using Tapatalk 2


No he's getting the wicked bumper and removing the oem and wanted to know if his buddy with a normal 150 could bolt it on... Reason for my last comment on faking the funk lol
 

BIRDMAN

Birdministrator
Joined
May 16, 2010
Posts
12,915
Reaction score
6,196
Location
Boston
No he's getting the wicked bumper and removing the oem and wanted to know if his buddy with a normal 150 could bolt it on... Reason for my last comment on faking the funk lol

ok, i sit corrected. i didn't think wicked was making bumpers anymore and his profile says he has an ADD Venom. Now i am more confused lol
 

chriskent85

Active Member
Joined
May 3, 2011
Posts
70
Reaction score
5
Location
Lake City, FL.
there was a tread a while back were a guy a 07 into a raptor. he had to cut a little off the frame in the front and it bolted right up. nothing major. and as far as the width you can trim the sides of the bumper and put the plastic end caps back in
 
Top