Who's happy with their cordless ratchet?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SurfRaptor

FRF Addict
Joined
Dec 28, 2019
Posts
1,167
Reaction score
738
Location
Newport Beach CA
I just recently went through this. Got the dewalt 1/2" hog ring (not detent pin), 3/8" impact wrenches and 5Ah batteries. I rotate my own tires and do most work in my driveway. I'd say it's a toss up between Milwaukee and Dewalt. I went with dewalt because it was on sale during the holidays.

I am 9.5/10 satisfied with Dewalt. I have an 80 gal air compressor and pneumatic impact wrenches that have much more power, but the ability to bring the portable ones outside of the garage like when a girlfriend calls with a flat tire on the side of the road or taking them on the trail in case there is an issue....

The 3/8" drive is really only for light weight jobs so I would get the 1/2" drive for sure. No one seems to mention having to purchase impact sockets which are a must with an impact wrench. A set of deep and shallow 1/2" and 3/8" ran me about $140 at Harbor Freight. Sure I'd love some more snap on sets but really at this point its a hobby and small mechanic jobs. It's just not needed right away. Make sure to buy a set of extensions too especially Wobble Extensions. They are a life saver!
 

jabroni619

FRF Addict
Joined
Jun 13, 2017
Posts
2,057
Reaction score
1,420
Fair enough. I'd consider getting one after having the previous three already then. The usefulness
of the cordless ratchet is too limited.

having said that this is the smart move:
https://www.amazon.com/dp/B07NQS465R/?tag=fordraptorforum-20

why invest in a cordless ratchet by itself that has very limited uses when you can buy an attachment for a far more useful tool at a cheap price??

Those “limited uses” can’t be replicated with impact wrenches, drivers or that bulky device you posted.
 

Nick@Apollo-Optics

Supporting Vendor
Supporting Vendor
Joined
Apr 3, 2011
Posts
7,483
Reaction score
3,129
Location
Houston, TX
I run DeWalt 20v Lithium Max Brushless. They've worked for me in 99% of cases. If I had to do it over again, I'd probably buy Milwaukee.

Also, thinking of adding some of the IR high torque tools to the lineup for those special use cases. 1 ton truck suspension can prove to be a bit much for some of the DeWalt stuff.
 

obz

Member
Joined
Apr 7, 2020
Posts
31
Reaction score
106
Location
Utah
Love my Milwaukee ratchet. I actually just picked it up and lowered one of my other cars and boy it made things go fast... and what's better, no sore wrists.
 

DFS

FRF Addict
Joined
Aug 13, 2020
Posts
1,068
Reaction score
2,417
Location
USA

For most things cordless ratchet, and mid/high impact I like these guys.
 
Top