How To Whelen Vertex Rear Facing Ambers

[Yukon Joe]

That's a good point. I'll have to check the image code and see if my username is in it. Might be as easy as swapping the names out.

Our gong back to Mobilebeats

Yukon Joe
www.RUNRAPTORRUN.com

 

[Rookie]

Our gong back to Mobilebeats

Yukon Joe
www.RUNRAPTORRUN.com

I just copied the text into word and hit replace all.

 

[rap67]

That's a good point. I'll have to check the image code and see if my username is in it. Might be as easy as swapping the names out.

you know way, way too much about forums................




Hey, if i have questions and such about forums, can I call you

 

[Chris's FX4]

That's a good point. I'll have to check the image code and see if my username is in it. Might be as easy as swapping the names out.

When in doubt, blame @Fred and @The Car Stereo Company

 

[Fred]

When in doubt, blame @Fred and @The Car Stereo Company

@Chris's FX4 The man has it all

 

[Rookie]

Figured I'd bump this for those of you making snoball prep lists. Just another option for your rear facing ambers.

Click Here to Purchase Your FRF Apparel!

Donate to Avery! Do it! Do it now!​

 

[Backinblack]

Good bump... Very impressive how to. The funny thing is, that you will never know when this mod may save lives. But that's a good thing. Plan for the worst.

 

[knine]

My last minute SnoBall prep was 3 days before for this. I got the spot when Ross had to cancell. I already had the Vertex's, so I did this. Thanks for the idea. I have a 12 and ran into 3 layers of metal, but I mounted a little further to the sides.

 

[Bulletnjm]

I gotta tell you i always loved this mod, but i am terrified to drill in to my cab

 

[Rookie]

My last minute SnoBall prep was 3 days before for this. I got the spot when Ross had to cancell. I already had the Vertex's, so I did this. Thanks for the idea. I have a 12 and ran into 3 layers of metal, but I mounted a little further to the sides.

I know I had to cut two layers. The second layer was about an inch further in though.

I gotta tell you i always loved this mod, but i am terrified to drill in to my cab

It's really not that bad. The biggest thing is making sure it's measured right and you have a good holesaw. A step down bit that goes that big would actually work better.

freedommotorsports.us

Phone: 260-444-7503
Email: [email protected]

​