wheels/bumpers/shocks/chaserack...

[slowjoe]

6 beadlocks/ oem shocks/ aftermarket and stock bumper

Several items for sale. Pics to come and as requested.

Wheels: (6) oem beadlocks, sold

Shocks: Just the standard fox oem for a screw. Sold
Front and rear were removed in perfect working order at roughly 18000 miles, no leaks or issues. Fronts are on mid perch and will have top plates. I upgraded to 3.0 suspension all the way around. Sold

Bumpers:
Bumper #1: Front oem, good condition. $200
Has very light rubbing from Rigid fog light mounts and lights. Bumperetts have been slotted to fit a 20" light bar, I still have the lower grill as well. Skid included and has some scratches, slightly bowed but not really noticeable $200
--if interested in the 20" bar that is still mounted on that bumper, all together $450


Bumper #2: Aftermarket NFAB bumper with four (4) light tabs sold
Has two skid plates, one from NFAB, that is really only the upper that requires the main skid from Ford to work, and a custom one to run from top to bottom and eliminates the main oem skid (much cleaner look, in my opinion) sold

Located in norcal, standard meet up or shipping on your cost..
Pm with any questions or contact info and I will respond as I can, thanks.

 

[KaiserM715]

Approved.

 

[BGA23]

Do you have a pic of the chase rack?

 

[justuspost]

And bumper 2.

 

[slowjoe]

Do you have a pic of the chase rack?

Yes, I'll get those pics on the listing up tonight, but if you'd like to pm me your number, I will send them out sooner

---------- Post added at 03:10 PM ---------- Previous post was at 03:07 PM ----------

And bumper 2.

Yes, I'll get those pics on the listing up tonight, but if you'd like to pm me your number, I will send them out sooner

Same to you, thanks.

 

[slowjoe]

Pics are up.

 

[BearLeeAsian]

Knowing that the chase rack is probably not worth you shipping.. Can you point me to the right direction on something like this? Did you DIY? Or was it made by a vendor?


Sent from my iPhone using Tapatalk

 

[slowjoe]

Knowing that the chase rack is probably not worth you shipping.. Can you point me to the right direction on something like this? Did you DIY? Or was it made by a vendor?


Sent from my iPhone using Tapatalk

DIY. ..spent just over 200 on materials and large pizzas for the shop guys to borrow their welder for a few afternoon's.
I want to say it was 1.5" square for the main and 1.25" for the legs, as they slide in and bolt together (kind of a quick connect, only not so quick). it's held up really well and the only reason I'm going another route is to pack more stuff for my expeditions and the two tires tying up the back half, is not feasible anymore.

A vendor who makes this low profile system might be XRD. Google them and see. Good luck.

 

[cubiefan101]

For the shocks. Does it matter if its scab or screw?

 

[slowjoe]

I don't truly know, but I'd think someone can chime in. I'll see what the forum says.

As far as mounts and overall dimensions, no. The only difference may be the rears for the weight in the screws additional fuel and size.