What mods are you planning! Let’s see the lists!

[Honeybadger_Zero]

I’ve noticed a lot of you are going aftermarket for Bedliner. Is the factory Ford spray in crappy or something?

no, same product essentially, though line-x has upgraded options for better quality /longer lasting product. Plus warranty through local place rather than bean counter in dearborn.

 

[RaptorWhoSaysNI]

To start the modifications off:
- Full Xpel Stealth PPF wrap
- tinting driver and passenger front windows
- Ford Performance diff cover
- doing research on bumpers and will eventually replace both front and rear
- train horns

 

[CoolrainRaptor]

#1. Black lug nuts….. hate the chrome on black look

 

[bp423]

Has anyone figured out how to do a tune on a 2021 Ecoboost yet?

 

[Olsen Motorsports]

Saw a few of us are doing satin clear bra as am I. We have to remove the graphics on the performance package to install it, thinking of buying some new bedside graphics and putting the Baja map over the top of the satin. Thoughts?

 

[WestTXRaptor6]

I do the aftermarket LineX/Rhino so I can have them do the rear fender wells also. Much better in my opinion than the Husky liners. Those were a pain.

 

[WestTXRaptor6]

Saw a few of us are doing satin clear bra as am I. We have to remove the graphics on the performance package to install it, thinking of buying some new bedside graphics and putting the Baja map over the top of the satin. Thoughts?

We always get the factory clear bra on my wife's LC 200s. Not sure why, she doesn't go anywhere. Same with her having Icon coil overs. lol
I really should for the Raptors but never have. Thanks for the reminder.

 

[RogueClimber]

I’ve noticed a lot of you are going aftermarket for Bedliner. Is the factory Ford spray in crappy or something?

On my Gen 1 I had linex do a color match bed liner which I thought looked great, also did the wheel wells (in black) so that is the plan on my next Raptor

 

[Olsen Motorsports]

I like color matched Bedliner! Never even thought of doing that! Great idea

 

[RotorOver]

So, my first mod is ready for the truck, whenever it arrives, but hopefully this week, LoL! Put together a visor panel using the OneTigris MOLLE Visor Cover, which is 1000D nylon with hook and loop MOLLE and has an interior pocket as well. It's got three elastic securing straps that also uses hook and loop and seems to hold the panel up well under weight.

The mounted stuff: I've got a trauma kit, which is a knock off of the ITS TraumaQuick Rapid Access System, and an ITS Medical TourniQuick pouch with SOFTT-W tourniquet mounted using the MOLLE and half of a Malice clip, so one pull on the clip and they will come off. A Gerber strap cutter, a small trauma sheers secured with a strip of hook and loop, an ink pen, Sharpie and a small CRKT Minimalist Bowie fixed blade "Get off me ****-er" knife, which is fully Malice clipped in. I'll also shove some extra nitrile gloves in the pocket.

The cool thing about these style panels is you can easily pull them down to stow when you you exit the vehicle if you were worried about the less than scrupulous members of our society. They can be re-installed in about 30 sec. or less. The downside of the three strap versions is it will make access to a visor mirror more difficult or not possible unless detached, so your make-up might have to wait.