What did you do to your Gen 3 today?

[khildebr]

Let's see that killer front diff cover on the rap, brother!

Here you go. As I mentioned, there isn’t a lot of room to spare.

 

[khildebr]

Also put on some TufSkinz on the door sills.

 

[Chazzersgarage]

Here you go. As I mentioned, there isn’t a lot of room to spare. View attachment 402989
View attachment 402986
View attachment 402987View attachment 402988

Is this diff cover the same as the rear?

 

[khildebr]

Is this diff cover the same as the rear?

Same Dana Spicer manufacturer as the rear cover that I put on but a smaller 8.8” 10 bolt cover. It’s not listed as a part that fits the Raptor on Summit’s site but it does show it fitting F-150s and from what the shop said, ”they all use the same differentials”. So I took a small risk that it wouldn’t fit but in hindsight, I might have been just as well off getting a stamped steel one and having a drain plug put on it. The laugh I had was in looking at the pan that is behind the front skid plate and covers the steering and differential is that there is a small rectangular hole in the pan about where the front differential is and is close but doesn’t line up with the drain plug n the new cover. I know that it isn’t there for that purpose but it was so close. I guess that’s what hole saws are for.

 

[jayspick]

Picked up a gmr45 rugged radio set up.
One thing to note you’ll need a 90 degree elbow if you want to close the lid with the mic plugged in.
I wish the mount was a little bit cleaner of a fit but it’s universal.

 

[Warpath]

Finished installing the rest of my mods:
-Cobb upper IC
-AFE intake
-Cobb radiator shroud
-Cobb coolant tank cover
-SPD 170° thermostat.

Also got my unlocked ECU and first TCM/ECU stage 2 Tune from @GooseTuned. Just sent my first log!

7

 

[Bozz]

Added -

Pedal Commander
Vantrue N1 dash cam with OBD power cable
Evil Mfg Dead Pedal
Carfka Air Train Horn
Re-did red steering wheel stripe
(2) 7-foot dunes flags
Halotron fire extinguisher
Staun tire deflators

 

[Bozz]

Oops! Wrong forum. Sorry.

 

[GCATX]

Oops! Wrong forum. Sorry.

I was gonna say, being a little hard on red stripe aren't ya.

 

[MDJAK]

Also put on some TufSkinz on the door sills.
View attachment 402990View attachment 402991

While I like those and the idea of them, I’d be leery that upon removal they may take paint with them. Also I can see dirt getting trapped around the edges.